Safety & Environment Jobs in Qatar

Plan, execute and supervise the implementation of Radiation Safety Management programme across all QatarEnergy LNG sites in due compliance with applicable Ministry of Environment and Climate Change (MOECC) and Qatar Energy (QE) directives to protect Company Onshore and Offshore assets, to safeguard public health and the environment and to achieve Company HSE objectives.Job Context & Major Challenge(s) - I• Managing Radiation Safety programs across the QatarEnergy sites with a single aim of protecting the health of employees and the environment.• Legal Compliance to the Qatar Ministry Radiation laws while working across the full scope of QatarEnergy LNG expansion projects, shutdowns and running assets, combined with the overall QatarEnergy LNG workforce.• The increasing scope and complexity of QatarEnergy LNG business combined with the increase in regulatory requirements and safety standards.• Huge spread of project construction and drilling activities.• During peak construction phase, there will be large numbers of project sites onshore and offshore involving radiography and estimated over 25 radiography teams in different project locations working concurrently.• At peak, 12 drilling rigs will be working concurrently offshore for 3 years with widespread use of specialist downhole radiography equipment.Key Job Accountabilities - I• Act as the Lead Custodian for the Radiation Protection (RP) program across QatarEnergy LNG.• Ensure program is implemented efficiently across Company facilities for maintaining radiation safety.• Lead the development of the Radiation safety-related documents and procedures as required.• Act as a focal point for managing the technical and regulatory direction of the radiation safety program, principal technical resource to the Leadership management team, department heads and line managers, primary contact for MOECC inspections and radiation related queries from MOECC.• Provide technical support to QatarEnergy LNG Field RPOs / RP Officers, provide advice on appropriate disposal of radioactive waste as per MOECC regulations, help the QatarEnergy LNG Asset teams for technical support on radiation training for their people in line with QatarEnergy LNG Training centre procedures.• Lead the team to coordinate with all departments within the Company as well as with all contractors and subcontractors working in QatarEnergy LNG in effective implementation of the Radiation Protection (RP) program and Radiation safety procedures across QatarEnergy LNG.• Participate in the preparation of the Radiation Safety budget to ensure all the programs and activities are properly funded.• Assist in monitoring budget reports and investigate and reconcile any significant variances to ensure effective Radiation safety program performance and cost control.Key Job Accountabilities - II• Identify requirements for specialized MOECC Approved Radiation Safety related contractor services as required in terms of MOECC regulations.• Oversee the compliance of the Radiation Safety program by all Contractors involved in radiation work in QatarEnergy LNG (compliance with contractual obligations and quality of the work to maintain radiation safety) in collaboration with end-users.• Provide specialist input to the concern departments in QatarEnergy LNG handling radiation activities, to ensure that the third-party radiation contractor management are fully aware of their responsibilities at initial stages of the contract.• Ensure adherence to the Qatar Ministry Radiation Procedures and management systems, so that all the deliverables are achieved within the set time limits to ensure all legal compliances in terms of Radiation Safety.• Participate in radiation related incidents, management workshops related to radiation safety.• Provide specialist inputs in risk-based work selection regarding Radiation Safety activities in planning stages to ensure all legal compliances to the Radiation Ministry Standards and associated company procedures are taken in considerations.• Overseas the performance and compliances of third-party Radiation contractor management in terms of radiation safety along with the QatarEnergy LNG Host under whom the contractor is working. Requirements • Plan, execute and supervise the implementation of Radiation Safety Management programme across all QatarEnergy LNG sites in due compliance with applicable Ministry of Environment and Climate Change (MOECC) and Qatar Energy (QE) directives to protect Company Onshore and Offshore assets, to safeguard public health and the environment and to achieve Company HSE objectives.Qualifications• Bachelor’s degree in engineering or science discipline.• Must be eligible to obtain a Radiation Protection Officer (RPO) licence from the MOECC (i.e., Embassy and University attested qualifications is must along with the experience documents in radiation field).Knowledge and/or Experience - I• 10 years’ related experience including 5 years’ experience as Supervisory level within the oil and gas or petrochemical industry. Has extensive knowledge in managing a Radiation Protection Program in an oil & gas facility or heavy industrial manufacturing setting.

Posted 2 years ago

Roles & Responsibilities · Operate field equipment in accordance with operating procedures and approved safety and environment procedures to ensure effective and optimum operational status of equipment. Make decisions to stop/start equipment based on experience and abnormal situations. · Monitor and log all operating parameters to ensure operations are within normal limits that all irregularities are reported to panel operator for advice and/or Shift Supervisor for solution. · Participate in one relevant off the job training course prescribed by or have equivalent education and experience to enhance the knowledge and understanding of the plant, shift supervisor can assign them as and when required. · Develop an understanding of all operational procedures and practices through on-the-job training to ensure readiness and capability to effectively operation of all field areas of the plant. · Provide immediate first-line response capability in the event of emergencies or major incidents in order to eliminate or limit potential loss or damage to personnel, assets and the environment. Make appropriate decisions considering the situation. · Perform and provide the necessary assistant on-the-job training of new and trainee operators to ensure they develop the necessary skills to independently operate the allocated areas of the plant. Perform and adhere to housekeeping procedure to maintain a safe, clean and neat work environment. Desired Candidate Profile · Minimum of High School + 2 years Diploma in relevant discipline · Minimum of 5 years direct experience working in Fertilizer, Petrochemical, Chemical, or Oil & Gas Industry. · Understand the process operations of natural gas compressor with steam turbine; process operations of CO2 removal unit; process operations of ammonia synthesis loop and ammonia recovery; process operations of desulphurization unit; process operations of H2S removal unit; process operations of process air compressor with power turbine; process operations of steam reforming; steam turbines and auxiliaries and isolation procedure; process operations of synthesis gas compressor with steam turbine; · Understand the purpose of closed cooling water. Know the function of the nitrogen plant and liquid nitrogen storage. · Know how the boiler feed water system operates; methanator operations; boiler feed water systems operations, desalination operations; return condensate system operations. · Know how to control an emergency or critical situation, prepare shut down and start up process systems in a safe and controlled manner protecting personnel from injury and plant or equipment from damage. · Know how to read diagrams and extract information from engineering drawings and specifications. Know how to use the full complement of firefighting equipment and understand the Permit to Work (PTW) system.

Posted 2 years ago

Roles & ResponsibilitiesRole holders perform routine activities and supervision according to the schedules, and non-routine work on request from Safety Specialist. They have a role also in coordinating the safety aspects in plants as well as being the focal point for customers and the Supervisor. In addition, they shall participate in all QAFCO Projects execution to ensure safe execution, also participate in the Accident / incident investigation to ensure safety of QAFCO’s manpower & Properties and verifying OH&S compliance on site. They have to encourage QAFCO Staff and contractors to establish interdependent safety culture. Key Accountabilities: Communicate with customer and Supervisor in order to advise on use of protective equipment, apply safety instructions, procedures and solve any difficulties related to safe working conditions/acts.Participate in incident investigation, collect findings, facts & propose, and follow the implementation of the corrective measures.Identify hazards through safety tour, safety walk and risk assessment and evaluate the possible corrective measure with other trades.Ensure the display of proper information/warning signs, protecting equipment and devices on site.Participate in Job Safety Analysis (JSA) as an Active Member.Write reports on inspections, findings, and functions of safety, fire equipment and facilities and come up with proposals suggestions for improvement.Follow up proper housekeeping in the area of responsibility and ensure the integrity of all accesses & escape routes in plants, stores & buildings.To ensure Safety related aspects during Major/Unplanned Shutdown and impart Expert Advice to Management by participating S/D Meetings.Conduct Various Safety Campaigns to address Safety Issues effectively.Prepare Safety Moments.Safety Presentation Accountability description.To carry out detailed Analyses of Accidents and Make Findings/Recommendations & Conclusion for effective Reduction & Control of Accidents.To deliver Presentation regarding Safety Issues in Trade Meeting to improve Safety Performance.Timely and correct reporting of findings, abnormalities during the daily tour in plants, storage areas, workshops, and contractors’ activities.Undertake timely the allocation and suitability of safety devices/showers and other emergency preparedness according to instructions/procedures in order to ensure integrity of its function.Follow up of Safety Walk for plants & buildings.Follow up of Corrective actions of safety findings.Verify evidence for closure of incident actions at site.Desired Candidate ProfileBachelor’s Degree in relevant discipline or engineering.10 years proven successful relevant experience in similar role within the Oil & Gas or Petrochemical Industry.Post Diploma in Industrial Safety or NEBOSH International General Certificate in Occupational Health & Safety

Posted 3 years ago

Roles & Responsibilities Job Summary: Role holder will assist Head of Safety in implementing Process Safety Management System in the organization. The incumbent will be a key member of the Process Safety team and will interface with the appropriate operations and technical teams to support in conducting the Process Safety Risk studies for Projects and existing operations facilitating Process Hazard Analysis (PHA) studies including but not limited to Hazard and Operability study (HAZOP), Safety Integrity Level (SIL), Quantitative Risk Assessment (QRA), Layer of Protection Analysis (LOPA), Failure Mode and Effects Analysis (FMEA), Major Hazard Analysis /Direct Hazard Analysis (MHA/DHA), Dispersion Studies and Safety Cases Studies. The role holder will comply with all relevant QAFCO Management System procedures in respect to Health, Quality, Safety and Environment. Principle duties and responsibilities: Assist Head of Safety in developing various documents and implementing activities related to monitoring and following-up Process Safety Management system. Develop the Company Process Safety Specifications and Standards to be used in all projects and assets operations. Partner with operational and technical resources to ensure compliance with Process Safety Management (PSM) requirements. Follow valid standards, technical requirements and good engineering practices to ensure that operations and projects are executed in line with agreed process safety specifications. Lead company-wide network to develop and update process safety related requirements and procedures Establish and track goals and measures for PHA program improvement and drive process safety corrective actions to closure Provide, when required, specifications for the procurement of equipment and services. Conduct evaluation of bids and recommend preferred suppliers to ensure meeting optimum process safety requirements. Coordinate the activities within Process Safety group. Lead and coordinate different campaigns to promote Process Safety within the company. Generating and reviewing Process Safety Management weekly and monthly reports. Carrying out analysis, preparation and reviewing of reports on various Process Safety activities and provide recommendation, when required. Participate in developing, implementing and facilitating Process Hazard Analysis (PHA) studies like HAZOP, SIL, QRA, LOPA, FMEA, MHA/DHA, safety cases and Dispersion Studies. Plans work activities, and coordinates with various operations and project teams to ensure safety activities are achieved within the set time schedules, specification and cost. Lead and/or participate in all process safety incidents. Ensure that incidents root causes are identified and action plans and lessons learnt are established and communicated within the organization to avoid incident reoccurrence. Champions process safety knowledge sharing across the organization. Provide the necessary guidance to the Operations and Project teams in the field of Process Safety. Enhance the knowledge and ability to perform safety analysis with all the engineers of all disciplines. Develop and implement key performance indicators (most importantly, leading indicators) to track the progress of PSM on a weekly and monthly basis. Evaluate new processes and modify existing processes and facilities to meet new requirements. Keep informed of technological developments and best practices in the area of responsibility in order to update knowledge, identify and recommend opportunities for increased effectiveness and/or cost reduction. Communicate external process safety events and share best practices identified within the company. Review process-related hazards and hazardous events as identified in related studies. Identify new process hazards associated with scope or design changes, and detail all the ways in which a hazardous event could occur. Establish consistent approach to Process Hazard Analysis (PHA) and Risk Management Program studies Develop knowledge to concerned personnel about PHA approach to grow process safety skills and knowledge across the organization Assist leaders to identify methods to ensure that the elements of PHA are integrated into the culture. Partner with leaders to develop short and long-term process safety objectives, targets, strategies, and measures that prioritize action plans and mitigate risks. Participate in the development of practical recommendations for process changes to mitigate, control, or eliminate process-related hazards and meet process related risk reduction objectives. Participate in the development of Safety Awareness Program that identifies at-risk employees and works to improve their safety awareness through pro-active safety based tasks. Works with concerned team to conduct the PHA, prepares for the study, advise on the selection of team members and methodology and the definition of study scope. Follow up and control implementation of recommended safety measures. Desired Candidate Profile Bachelor’s Degree in Engineering obtained through full time study. Certifications, such as NEBOSH International Technical Certificate in Oil and Gas Operational Safety, Process Safety Management, Incident Investigations & Root Cause Analysis, Process Hazard Analysis are desirable. A minimum of 10 years proven successful experience in a similar position with extensive in Process Safety field within Fertilizer, Petrochemicals or Oil & Gas industry. Should have knowledgeable about codes, standards and recommended practices for Process Safety Management Should have good engineering judgment; ability to recognize, assess, and mitigate hazards, Attention to detail, initiative, highly organized, good analytical skills, and practical use of engineering principles.

Posted 3 years ago

Roles & Responsibilities POSITION - SAFETY OFFICERPROJECT - MANAGING THE WAREHOUSE OF AN OIL AND GAS MAJORLOCATION - QATAR JOB DESCRIPTION Roles & Responsibilities We are looking to hire a qualified and competent safety officer with complete NEBOSH AND IOSH who will be responsible for the health and safety of staff in the workplace. The safety officer will compile safety programs and standardize them to remain consistent and share best practice techniques at regular staff meetings at the assigned location. Safety Officer Responsibilities: Compile safety programs. Practice safe working techniques. Implement and maintain health and safety standards. Establish a cordial and professional relationship with employees. Maintain compliance with all safety regulations. Conduct regular staff meetings to share best practice techniques. Standardize health and safety to remain consistent. Identify hazardous waste and dispose of it correctly. Promote safety initiatives. Compile and maintain relevant registers to ensure compliance. Document staff information, minutes of meetings, and reports compiled for management. Regularly inspect equipment. Desired Candidate Profile ➢ Bachelors in commerce / Business Administration / Higher national diploma (HND) or Diploma in Engineering from a recognized professional institution or an equivalent Educational Qualification approved by Head of Warehouse. Bachelor's degree in Mechanical Engineering will be an advantage. ➢ A bachelors degree or an associate degree. Or Diploma ➢ With Complete NEBOSH and IOSH ➢ Registration as a Health and Safety Officer. ➢ Strong communication skills. ➢ Minimum of 3 years experience in the Oil and Gas Industry. ➢ At least 2 years of working experience in GCC or Middle East countries (preferable). ➢ Proficient in all Microsoft Applications. Perks and Benefits Long term contract Accommodation, Work related Transportation, Food provided by the company To & from air ticket to your native country on completion of 12 months of service 21 days paid vacation with up and down flight ticket Gratuity/End of service benefit

Posted 3 years ago