Draft and negotiate contract terms with stakeholders to ensure clarity and compliance with legal standards.Conduct thorough risk assessments to identify potential contractual liabilities and mitigate risks proactively.Liaise with project teams to align contract deliverables with project timelines and budget constraints.Review and analyze incoming contract proposals, providing expert recommendations to optimize terms for the company.

� Hiring: Plant Supervisor – Finishing (Mechanical) �Industry: Steel Manufacturing / Heavy Industry / EPC SupportLocation: Gulf RegionExperience: 6–8 YearsQualification: Technical Diploma (Mechanical or related)Key ResponsibilitiesSupervise routine maintenance, breakdowns, operational stoppages, and major shutdownsPlan and execute preventive, corrective, and annual maintenance activitiesManage manpower deployment to maximize productivity and minimize downtimeCoordinate with Operations, Engineering, HSE, Stores, and external service providersLead shutdown surveys, contractor activities, and work progress monitoringEnsure compliance with PTW, LOTO, HIRA, TBT, and HSE proceduresMonitor maintenance costs, materials consumption, and inventory levelsMaintain accurate equipment history, logbooks, CMMS / Maximo recordsPrepare daily, monthly, and shutdown reports for management reviewSupport ISO 9001 / 14001 / 45001 compliance and audits.

To oversee the support for the planning, tendering, and contracting processes to ensure the smooth function of the Contracts DepartmentDescription Key Results Policies, Processes and Procedures Applies approved section policies, processes, and procedures and monitors adherence so that work is carried out in a controlled manner.Adherence to the department policies, processes and procedures Day- to-day operations.Applies the day-to-day operations assigned for the section to ensure compliance with the established standards and procedures .Smooth flow of day-to-day operations Coordination.Assists proponent department in writing the RFP and reviews it for technical consistency and conformance to KJO standards.Feedback from proponent department Advisory.Provides advise to the proponent department on matters related to the tender documents and overall process.Provides advise as required on different types of tendering scenarios, as well as contract risks.Feedback from proponent department.Tender Administration: Quality of documentationDatabase up-to-date Risk Management.Invoice and claim handling

Minimum Qualifications:Bachelor’s Degree (Major in Commerce/Accounting/Auditing) and CA / ACCA / CPA or equivalent professional qualifications.CIA, CISA, CFE, DISA and equivalent certifications would be an added advantage.Minimum Experience:§ 5 years minimum experience in the field of internal audits, preferably in a steel/manufacturing industry.Job-Specific Skills (Generic / Technical):§ Excellent knowledge of Policies & Procedures with strong and demonstrated experience in auditing.

Minimum Experience:§ 8 years minimum audit experience with 4 years’ experience in senior employee position including at least 3 years in the field of technical internal audit in a steel/manufacturing industry.Job-Specific Skills (Generic / Technical):§ Experience in conducting detailed Manufacturing Audits and Benchmarking of Consumption of Raw Materials, Energy and other Resources.§ Plants Performance Evaluation (Capacity, Production, Energy Efficiency, Equipment efficiency etc.).§ Optimization of Cost Control Measures in Production, Maintenance and Operations (including Turnarounds – Planned Shutdowns).§ Techno-commercial ability to understand the entire business from shareholders perspective.§ Excellent knowledge of Policies & Procedures with strong and demonstrated experience in auditing.§ Advanced customer service orientation.§ Ability to work in a team environment and independently with minimal supervision as the task may be from time to time.§ Strong conflict management, facilitation, and resolution skills.§ Excellent relationship building skills.§ Extensive skill handling personnel from a multi-cultural work environment.Technical Internal Audit Operations:• Perform operational and engineering audits related to production processes, maintenance systems, and plant operations to ensure compliance with Qatar Steels’s standards, procedures and policies.• Evaluate automation and control systems across production plants and machinery to ensure reliability, safety, and compliance with operational standards.• Inspect maintenance records and asset lifecycle data for critical equipment and infrastructure to verify adherence to preventive maintenance schedules, ensure reliability and reduce downtime.• Analyse energy consumption and utility systems within plant operations and infrastructure to identify inefficiencies and recommend cost-saving measures.• Review engineering change management processes affecting product design and process modifications to ensure proper documentation, approval, and risk mitigation.• Review compliance with safety, environmental, and quality standards (e.g., ISO 9001, ISO 14001, OHSAS 18001).QUALIFICATIONS, EXPERIENCE, & SKILLS:Minimum Qualifications:· · Bachelor’s degree in engineering (Mechanical, Electrical, Industrial, or Metallurgy), or a related technical field.

Responsible for collection, analysis and presentation of financial and accounting data, both internally and externally. Provide professional advice and guidance relating to a broad spectrum of accounting, management accounting and financial reporting; demonstrating a sound understanding of the underlying principles, concepts and standards.Monthly / Annual Closing:· Periodic closing and opening subsequent month Cost Management and Inventory modules.· Overhead allocations and absorptions allocations on monthly basis.· Allocation of joint cost through mass allocation. Prepare books closing JV though overhead allocation. Prepare working for absorption variance and pass necessary JV before month close.· Monitoring of pending transaction for inventory organizations and closing all inventory organization. Clearing of various WIP accounts.· Monitoring expenses booking and scrutiny of trial balance. Running COGS recognition program and monitoring WIP jobs valuation.Passing necessary accounting JVs for WIP and absorption variances.QUALIFICATIONS, EXPERIENCE, & SKILLS:Minimum Qualifications:· University Degree in Finance· CA, CMA or CIMA qualification would be preferable.Minimum Experience:· 6 years’ experience in Management Accounting in a manufacturing organisation. Steel Industry experience would be preferable.Job-Specific Skills (Generic / Technical):§ Computer skill - Good in Excel and Power point§ Experience in Oracle system§ Good standard of written and spoken English and well developed report writing ability§ Planning and organising skills§ Basic Supervisory skills§ Ability to work as part of a team§ Communication skills – written and verbal

Minimum 5 years of experience in administrative support with a focus on scheduling, reporting, planning at an oil & gas or petrochemical company.Coordinate the development of maintenance schedules based on work plans developed by Maintenance Planners and circulate them to Production, ensuring stakeholder alignment.Facilitate ad-hoc updates of maintenance schedules by coordinating with Maintenance Planning Engineers, ensuring the efficiency of the rescheduling process.Support the development of maintenance reports (daily, weekly, monthly, emergency shutdowns) in coordination with Maintenance Supervisors, ensuring accurate and timely information dissemination.

Manage pre-award and post-award subcontracting activities, including preparation of tender documents, evaluation of bids, and contract negotiations.Conduct vendor prequalification and performance appraisals in line with project and company standards.Administer contracts throughout the project lifecycle,ensuring compliance with terms and conditions, identifying risks, and providing mitigation strategies.Review, interpret, and manage contract terms and conditions, including changes, claims, and dispute resolution.Coordinate with internal stakeholders including legal,project management, engineering, and procurement teams to ensure seamless contract execution.Support cost control and forecasting activities through contract alignment and cost verification.Maintain proper documentation and records of contract and subcontract files.Contribute to continuous improvement initiatives in contract management processes and systems.Participate in audits and ensure compliance with NMDC policies, regulatory requirements, and international standards.

Inspection.Management Reports.Continuous Improvement.Policies, Systems, Processes and Procedures.Knowledge of car repairs.Ability to collaborate and communicate effectively.Ability to work under pressure.Attention to details.

Support Emergency Response Coordinators to effectively implement emergency response systems and strategies for the company, and Offshore Operators.

To operate and closely monitor continuous casting equipment to achieve the planned production targets following standard work procedure and instructions, and to inspect and timely prepare the machine equipment during sequence break.

Bachelor’s degree in Engineering Preferably in Mechanical, Civil or Naval.4 years’ experience in offshore construction. § Good communication skills.Good report writing skills.Good communication and decision-making skills. Committed team player.Good understanding of offshore operations

High Voltage (HV) Engineer will be responsible for managing Maintenance of Overhead Transmission Lines, Electrical Switchgears, transformers, Prefabricated Outdoor Substation (POS), substations, etc.HV Engineer is responsible for the liaison with competent authority to comply with all statutory requirements and codifications and adhere to strict follow up of standards pertaining to the High Voltage systems in the Oil & Gas environment.

OPENING FOR A WELL KNOWN OIL AND GAS COMPANY In MIDDLE EAST:Position: Electrical EngineerExperience: Minimum of 10 years of related experience in Oil&Gas Industry.Bachelor’s degree in Electrical Engineering or equivalent.10+ years’ experience in an oil and gas environment.Strong Experience in Project Designing & FEEDAttain/maintain/acquired competence in accordance with the technical competence framework requirements.

Roles & Responsibilities · Operate field equipment in accordance with operating procedures and approved safety and environment procedures to ensure effective and optimum operational status of equipment. Make decisions to stop/start equipment based on experience and abnormal situations. · Monitor and log all operating parameters to ensure operations are within normal limits that all irregularities are reported to panel operator for advice and/or Shift Supervisor for solution. · Participate in one relevant off the job training course prescribed by or have equivalent education and experience to enhance the knowledge and understanding of the plant, shift supervisor can assign them as and when required. · Develop an understanding of all operational procedures and practices through on-the-job training to ensure readiness and capability to effectively operation of all field areas of the plant. · Provide immediate first-line response capability in the event of emergencies or major incidents in order to eliminate or limit potential loss or damage to personnel, assets and the environment. Make appropriate decisions considering the situation. · Perform and provide the necessary assistant on-the-job training of new and trainee operators to ensure they develop the necessary skills to independently operate the allocated areas of the plant. Perform and adhere to housekeeping procedure to maintain a safe, clean and neat work environment. Desired Candidate Profile · Minimum of High School + 2 years Diploma in relevant discipline · Minimum of 5 years direct experience working in Fertilizer, Petrochemical, Chemical, or Oil & Gas Industry. · Understand the process operations of natural gas compressor with steam turbine; process operations of CO2 removal unit; process operations of ammonia synthesis loop and ammonia recovery; process operations of desulphurization unit; process operations of H2S removal unit; process operations of process air compressor with power turbine; process operations of steam reforming; steam turbines and auxiliaries and isolation procedure; process operations of synthesis gas compressor with steam turbine; · Understand the purpose of closed cooling water. Know the function of the nitrogen plant and liquid nitrogen storage. · Know how the boiler feed water system operates; methanator operations; boiler feed water systems operations, desalination operations; return condensate system operations. · Know how to control an emergency or critical situation, prepare shut down and start up process systems in a safe and controlled manner protecting personnel from injury and plant or equipment from damage. · Know how to read diagrams and extract information from engineering drawings and specifications. Know how to use the full complement of firefighting equipment and understand the Permit to Work (PTW) system.

Roles & Responsibilities • Provide cost analysis, controls and report activities for Capital and non-Capital projects. • Provide input and recommendations for cost engineering requirements relative to staffing, project controls, and preparing and analyzing comparisons of scope, quantities and cost data between the project forecasts and the budgets. • Organize, monitor and control project costs and will define project needs for cost control in accordance with contractual requirements, objectives, and Company procedures. • Ensure that all project commitments are accurately reported and will maintain updated final project forecasts and expenditure forecasts. • Proactively advise management when forecasted costs exceed the approved budget. • Use statistical tools to analyze costs metrics and perform risk analysis. • Analyze contractors' cost reports and extract required data for management reporting. • Prepare and report cost engineering information on a monthly basis and additional ad-hoc reports as required by Management. • Provide all cost engineering expertise and coordinates activities as group/unit leader as required in preparation of cost portion of the engineering, procurement and construction contracts. • Collect, monitor, analyze and report all cost information through the Project Manager. • Review and analyze all claims and Change Orders on project contracts. • Participate in the negotiation of project contracts as required. Initiate appropriate action when total forecast indicates allocated funds will be exceeded. Desired Candidate Profile As the successful candidate, you will hold a bachelor's degree in Engineering from a recognized university • You will have a minimum of fifteen years cost engineering experience in oil and gas, petrochemical, refinery projects or facilities, with at least ten years in managing project budgets, cost tracking, forecasting; and financial reporting with a Broad, multidiscipline knowledge and experience of cost engineering for Oil and Gas projects. • A certification from Professional Organization is highly recommended.  

Roles & Responsibilities 1. Plant Operations Perform or assist in the start-up or shut down of assigned plant and facilities according to approved operating procedure or instruction   2. Quality Management "Conduct regular inspections and walk through of plant facilities to ensure plant is functioning efficiently. Also, spot malfunctions or symptoms and refer to Shift Supervisor or console operator 3. Emergency Response Respond to emergency or upset conditions taking necessary field activities, such as flaring, blow down, isolation, diversion, switching with close communication with console operator and/or shift supervisor 4. Sample Testing Collect sample and perform process chemical and physical test as required   5. Shift Support Support or Assist Shift supervisor if required and as per instructed such as communication with other section, contractor or vendor and issue work permit   6. House-Keeping and Technical Support Perform in-plant housekeeping duties and provide appropriate technical advice to other field operator or sharing good and bad experiences with colleagues, upon request, to realize efficient and effective operations   7. General Task Perform any other duties and responsibilities as designated by the Shift Supervisor Desired Candidate Profile Education/Certifications (Specific educational qualifications, degree, certification required for this role) 1) High School/ diploma Experience/Specific Knowledge (Minimum experience any specific knowledge required for this position) High school with Min. 2 years of experience or Diploma with 1 years of experience 1) Plant specific understanding of mechanism and start/stop field operation 2) Basic understanding of instruments, DCS and emergency shutdown system taking in charge 3) Thorough understanding of refinery or petrochemical plant layout and operating process taking in charge 4) Safety awareness and implementing safety policy and Hazards protection

Roles & Responsibilities To operate the filed equipments in the assigned production units of MTBE complex, comprising of comprising of Butamer & PSA, Oleflex (including cold box), CCR unit, MTBE synthesis, ORU, CSP unit, OSBL facilities and storage spheres to have safe and reliable plant operation. Regularly check the equipments / gauges / indicators, record parameter deviations and report anomalies to Process Controller / Shift Engineer. Desired Candidate Profile Minimum Qualifications: Secondary School Certificate. Technical Diploma from a recognized institute is preferred. Minimum Experience: 7 years’ relevant plant operational experience as field process technician in a large MTBE or MTBE related petrochemicals plant. Experience should include training in and exposure to the following areas of plant operations: Butamer & PSA, Oleflex (including cold box), CCR unit, MTBE synthesis, ORU, CSP unit and OSBL including storage spheres.

Roles & Responsibilities Work closely with the management and key business partners to execute and implement the sustainability strategy of the brand as well as continually evaluating, augmenting and developing upon the existing strategy plan. Coordinating with Sustainability team in the manufacturing unit and implementing Sustainability Programs like Energy Efficiency, Water Consumption, Waste Management and other Environment impact mitigation to promote sustainability strategy Review, maintain and adapt the Sustainability strategy across the business (environmental, social and innovation) Develop good understanding on the implementation of ISO 14001 (Environment management system), GRI, SEDEX, SBTi, UNGC, ISO26000 (social sustainability) and ISO20400 (sustainable procurement) standards. Desired Candidate Profile Education: B.Sc. degree in Environmental Science/Sustainability or Post graduate qualification or a Master’s Degree in Environmental Science /Sustainability is an advantage Certifications/Trainings Needed: Certification -ISO 14001 (Environment management system), SEDEX & UNGC & SBTi Hands on experiences on Sustainability projects Experiences Relevant 5 years' experiences in a similar area . Working within production/ manufacturing industry.

Roles & Responsibilities Hello Everyone, Revathi here from Sofomation energy, We have opportunity for one of our reputed Hospital based in the Middle EastPositions: Registered Nurse and Head NurseQualification :Bachelor Degree is compulsoryExperience: Minimum 2 years experience of Registered Nurse and Head Nurse for minimum 7 YearsDepartment: OR, PICU, L&D, ER, NICU, Medical, Surgical, VIP, Paediatric, ICU, NurseryIf interested kindly share your updated CV"Request you to spread this message in your network (friends or colleagues) who are suitable for similar job"Thanks and Regards,Revathi Acharya

Roles & Responsibilities Hello Everyone,We have opportunity for one of our reputed Hospital based in the Middle EastPositions: HR Recruiter (Arabic speaking preferred)Qualification : Bachelors degreeExperience: Minimum 1 years of experience in basic recruiting workIf interested kindly share your updated CV "Request you to spread this message in your network (friends or colleagues) who are suitable for similar job"Thanks and Regards,Revathi Acharya

Roles & Responsibilities · Bachelor’s degree in Engineering from a recognized and approved program. An advanced degree is preferred. · Will also obtain a PMP, PgMP or equivalent certification. · Will have Fifteen years’ experience in project management field related to refining and petrochemical industries with a specialty in Petrochemicals. Including Seven (7) years of experience as Sr. PE or project manager in design, construction, pre-commissioning, commissioning, startup, and operation with values ranging from $500MM to $billion. · Must have Engineering Design & Construction phase experience with a thorough knowledge of engineering practices and economic principles in the applicable International Codes, Standards and Specifications. · Understanding of international procedures of Projects Phases, Engineering Phases, Bidding procedures, Procurement Processes, Construction Requirements and up to date Best Practices. Will have a mastery understanding of contract documents (inclusive of appendices, drawings and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications and project schedule to support Department Manager in timely completion of projects.

Roles & Responsibilities Manage Teams of the multiple EPIC Project Services staff to provide Cost Management, Budget Control, Planning and scheduling, Contracts, Procurement, Accounts Payable, Document Control, Project Reporting and general administrative services. Develop and implement project control strategies to ensure successful project execution. Monitor project progress and performance, identifying and addressing any issues or risks that may arise. Manage project schedules, budgets, and resources, ensuring they are effectively allocated and utilized. Coordinate with internal and external stakeholders to gather project requirements and ensure alignment with project objectives. Prepare and present project reports and status updates to senior management and clients. Conduct regular project reviews to evaluate performance, identify areas for improvement, and implement corrective actions. Provide guidance and support to project teams, ensuring they have the necessary tools and resources to meet project goals. Develop and maintain project documentation, including project plans, budgets, and risk assessments. Desired Candidate Profile B.Sc. in an Engineering discipline from a recognized University; higher degree would be advantageous. Membership of a recognized professional engineering association/institution. PMP certification would be advantageous. Minimum 18 years of relevant experience in the Oil & Gas Industry with an IOC, EPIC Contractor or Oil & Gas Company in major projects implementation, of which a minimum of 8 years in the position of Head/Lead Project Control Engineer