Prepare and develop arrangement and detail conceptual, FEED, studies, and detail design drawings of high technical quality and professional consistent presentation ensuring clarity and ease of construction.Develop 3D models and ensure clash-free with other disciplines.Ensure design deliverables are completed and issued per project specifications, MDR, and project Level 2 & 3 procedures, and within agreed schedules and budgets.Apply knowledge and/or skills to a range of activities.Set priorities, organize own work and time to meet objectives, and (as a Lead Designer) forecast and plan resource requirements.Become fully familiar with the project scope of work, specification, schedule, and all inter-discipline requirements; identify concerns as early as practicable and take the appropriate initiative to address the issue.Identify changes to the scope and promptly raise change notifications and provide any necessary supporting documentation and estimates.Provide similar support for Variation Order.Interface with all disciplines to develop a clash-free design.Interface with other department to obtain input for Discipline design and drawing.Liaise with other discipline support groups to ensure clearly defined interface, deliverables, and schedule are met.Document substantive communication (communication that results in a significant decision or assignment of action) and forward copies to Discipline Lead Engineer and Discipline Manager.Assist Discipline Lead Designer in preparing estimates for proposal and job scope change, which include execution statement, work schedule, and manhour requirements, identify software requirements and any other project-specific requirement.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred Company procedure, specification, standard, practice, and operational requirement.Participate in finalizing deliverable list and deliverable, ensure compliance with specification and functional integrity.Review project schedule and fabrication schedule in relation to construction sequence, milestone, and design scope.Attend project kickoff and review meeting, vendor/supplier meeting, engineering and design meeting, and offshore site survey, as required.Research customer standards and procedures to prepare project-specific design procedures and standards for submission to the Customer for approval.Set up and maintain the Discipline Master design drawing and document files.Develop and maintain the project job book.Prepare and review discipline deliverables such as:3D model.Detailed design drawing.Develop conceptual layouts based on experience and good offshore engineering practice & develop these through detailed design.Assist the lead designer to supervise in the preparation of key discipline drawing.Liaise with the Engineer responsible for the timely expediting of Vendor Data to efficiently progress the project according to schedule requirement.Review drawings issued by other disciplines and incorporate the required data into Discipline drawing.Review vendor drawings and documents and incorporate required vendor data into discipline drawings and document.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverable.Generate IDC design documentation for the project.Perform design verification through single discipline checks (SDC)and/or inter-discipline checks (ID), provide comments to Lead Designer.Review all project IDC design documentation for detailed technical interface.Maintain single discipline and inter-discipline check drawings and filing, that include final archiving.Assist fabrication as required in the resolution of construction difficulties relating to design, problems, clash, etc.Monitor progress and maintain the deliverables register on an ongoing basis.Ensure compliance with the project execution plan and the timely completion and archive of drawings and document.Keep the Discipline Supervisor/Engineering Manager apprised of all activity and concerns, technical, budgetary, and manpower related.Assist in providing inputs for actual, plan, and forecast progress report that include associated productivity.Prepare forecast schedule of delayed deliverables.Advise the Lead Designer and Design Supervisor/Engineering Manager of problem areas and/or manpower concern.Report any error and suggest a resolution for the same.Participate in design review and audit.Highlight knowledge concepts and ensure learning is entered into the system.Act as a technical resource to others in their own discipline.Provide leadership, mentorship, and guidance to others.Assist in the maintenance of departmental technical guidelines and standards.Participate in the development and maintenance of Global Procedures, Software, Guidelines, and Standards.Incorporate approved lessons learned into level 2&3 drafting procedures and standards, as applicable.Develop an understanding of the business and process.Identify and provide training to staff in specific techniques and proprietary software.Assist the Department Manager in identifying departmental needs including the development of personnel and technical capability.Participate in forums and represent the company as subject matter expert (SME).Provide information on employee performance to the Discipline Supervisor/Engineering Manager.Assist discipline supervisor/engineering manager in interviewing a job applicant.Participate in the clash resolution meeting, as required.Travel to the fabrication yard or offshore to assist in mechanical completion, hookup, and/or commissioning, as required.

Prepare and develop arrangement and detail conceptual, FEED, studies, and detail design drawings of high technical quality and professional consistent presentation ensuring clarity and ease of construction.Develop 3D models and ensure clash-free with all other disciplines.Ensure design deliverables are completed and issued per project specifications, MDR, and project Level 2 & 3 procedures, and within agreed schedules and budgets.Apply knowledge and/or skills to perform complex work.Set priorities, organize own work and time to meet objectives, and (as Lead Designer) forecast and plan resource requirements.Become fully familiar with the Contract Scope of Work, specifications, schedule, and all interdisciplinary requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Identify changes to scope and promptly raise change notifications in the Change Management system, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other disciplines to obtain input for Discipline designs and drawings.Liaise with other discipline support groups to ensure clearly defined interfaces, deliverables, and schedules are met.Document substantive communications (communications that result in significant decisions or assignment of actions), and forward copies to the Discipline Lead Designer and Discipline Supervisor.Assist Discipline Lead Designer in preparing estimates for proposals and job scope changes, including execution statements, work schedules, and man-hour requirements, identifying software requirements and any other project-specific requirements.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Participate in finalizing deliverables lists, deliverables, and philosophies to ensure compliance with specifications and functional integrity.Review project schedule and fabrication schedule in relation to construction sequence, milestones, and design scope.Attend project kickoff and review meetings, vendor/supplier meetings, engineering and design meetings, and offshore site surveys as required.Research Customer standards and procedures to prepare project-specific design procedures and standards for submission to the Customer for approval.Set up and maintain the Discipline Master design drawing and document files.Develop and maintain project job books.Prepare and review Discipline deliverables such as:3D model.Detailed design drawings.Develop conceptual layouts based on experience and good offshore engineering practice & develop these through detailed design.Assist the Lead Designer in supervising the preparation of key Discipline drawings.Liaise with the responsible Engineers for the timely expediting of Vendor Data to efficiently progress the project according to schedule requirements.Review drawings issued by other disciplines and incorporate the required data into Discipline drawings.Review vendor drawings and documents and incorporate required vendor data into Discipline drawings and documents.Assist in providing necessary design inputs to other disciplines to enable them in proceeding with their deliverables.Generate IDC design documentation for the project.Perform design verification through single discipline checks (SDC) and/or inter-discipline checks (IDC), providing comments to the Lead Designer.Review all project IDC design documentation for detailed technical interfaces.Maintain single discipline and inter-discipline check drawings and filing, including final archiving.Assist Fabrication as required in the resolution of construction difficulties relating to design problems, clashes, etc.Monitor progress and maintain the deliverables register on an ongoing basis.Ensure compliance with the Project Execution Plan and the timely completion and archiving of drawings and documents.Keep the Discipline Supervisor/Engineering Manager apprised of all activities, progress, and concerns, including manpower and budgetary-related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Prepare forecasting schedules for delayed deliverables.Advise the Lead Designer and Design Supervisor/Engineering Manager of problem areas and/or manpower concerns.Report errors and suggest a resolution for the same.Participate in design reviews and audits.Capture lessons learned and entered them into MDR's Lessons Learned system.Act as a technical resource to others in their own Discipline.Provide leadership, mentoring, and guidance to others.Assist in the maintenance of departmental technical guidelines and standards.Participate in the development and maintenance of Global Procedures, Software, Guidelines, and Standards.Incorporate approved Lessons Learned into MOR Level 2 & 3 drafting procedures and standards, as applicable.Further develop an understanding of MDR's business and processes.Identify and provide training to staff in specific techniques and proprietary software.Assist Department Manager in identifying departmental needs including the development of personnel and technical capabilities.Participate in McDermott forums and represent McDermott as a subject matter expert (SME).Provide information on employee performance to the Discipline Supervisor/ Engineering Manager.

Prepare and develop arrangement and detail conceptual, FEED, studies, and detail design drawings of high technical quality and professional consistent presentation ensuring clarity and ease of construction.Develop 3D models and ensure clash-free with all other disciplines.Ensure design deliverables are completed and issued per project specifications, MDR, and project Level 2 & 3 procedures, and within agreed schedules.Apply knowledge and / or skills to complete a variety of day-to-day activities within own area.Continue developing skills to complete repetitive tasks efficiently.Prioritize and organize own work to meet agreed-upon deadlines.Become fully familiar with the Contract Scope of Work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Identify changes to scope and promptly raise change notification in the Change Management system, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other disciplines to obtain input for Discipline designs and drawings.Liaise with other discipline support groups to ensure clearly defined interfaces, deliverables, and schedules are met.Document substantive communications (communications that result in significant decisions or assignment of actions), and forward copies to Discipline Lead Designer and Discipline Supervisor.Assist Discipline Lead Designer in preparing estimates for proposals and job scope changes, including execution statements, work schedules, and man-hour requirements.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Participate in finalizing deliverables lists, deliverables, and philosophies to ensure compliance with specifications and functional integrity.Attend project kickoff and review meetings, vendor / supplier meetings, engineering and design meetings, and offshore site surveys as required.Research Customer standards and procedures in order to prepare project-specific design procedures and standards for submission to the Customer for approval.Set up and maintain the Discipline Master design drawing and document files, including final archivingPrepare and review Discipline deliverables such as:3D model.Detailed design drawings.As-built drawings.Review drawings issued by other disciplines and incorporate the required data into Discipline drawings.Review vendor drawings and documents and incorporate required vendor data into Discipline drawings and documents.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Identify all items for which insufficient data is available to allow the drawing or model to be completed (HOLDS), and list these on the drawing and on the standard 'HOLDS' list form Notify the Discipline Lead Designer when there are updates to the Holds list.Generate IDC design documentation for the project.Perform design verification through single discipline checks (SDC) and / or inter-discipline checks (IDC), providing comments to the Lead Designer.Review all project IDC design documentation for detailed technical interfaces.Maintain single discipline and inter-discipline check drawings and filing.Prepare, issue, and update material and weight data take-offs.Assist Fabrication as required in the resolution of construction difficulties relating to design problems, clashes, etc.Monitor progress and maintain the Discipline deliverables register on an ongoing basis.Ensure compliance with the Project Execution Plan and the timely completion and archiving of drawings and documents.Keep the Lead Designer apprised of all activities, progress, and concerns, including manpower and budgetary-related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Report errors and suggest resolution for the same.Participate in design reviews and audits.Capture lessons learned and enter into MDR's Lessons Learned system.Guide less experienced Designers on MDR and Discipline procedures, standards, worksheets, design calculations, software, technical queries, etc.Provide guidance to trainee Designers.Assist in the maintenance of departmental technical guidelines and standards.Further develop an understanding of MDR's business including processes and procedures.Prepare / review Electrical Design deliverables such as:3D model Electrical scopes.One-line diagrams.Schematics.Interconnection and wiring diagrams.Block diagrams.Area classification drawings.Conduit and cable schedules Power layout drawings.Earthing/grounding layout drawings Lighting layout drawings.Electrical cable tray drawings Electrical building drawings Electrical support drawings Electrical drawing indexes Lighting design calculations.Cable sizing.Prepare / review bills of material and perform material take-offs for electrical items including cables, lighting fixtures, cable trays, cable glands, termination kits, and MCTs.Participate in clash resolution meetings, as required.Travel to the fabrication yard to assist in mechanical completion, hookup, and / or commissioning, as required.

Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and - procedures.Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements.Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Interpret contractual requirements as they relate to engineering execution.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management teams, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope.Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Instrumentation and Controls Engineering.Prepare, review, and (as Lead Engineer) approve design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures; procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations, preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by the Discipline Lead Engineer.Assist in updating weight reports based on receipt of vendor information.Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Review and (as Lead Engineer) approve design verification through single-discipline check / inter-discipline check (IDC).Provide technical support to fabrication queries, including identifying defect/rectification requirements.Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and manpower related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved.Present issues and problems to Customers in а timely manner and assist the Lead Engineer in negotiating resolution by project and company requirement.Perform (as required) Technical Quality Audit reviews by MDR Global Procedures.Assist Lead Engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approvalCapture lessons learned and entered them into MDR's Lessons Learned system.Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables.Responsible for the engineering integrity of the assigned work area.Monitor costs of own work processes.Assist in the maintenance of departmental technical guidelines and standard calculation notes.Participate in the development and maintenance of Global Procedures, Software, and Standards.May participate in standards development committees or task groups such as API.Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions, and/or present topics at lunch and learns; etc.).Identify and provide training to staff in specific techniques and proprietary software.Provide information on employee performance to the Discipline Manager.Assist the Discipline manager in interviewing job applicants.Prepare, review, and (as Lead Engineer) approve automation system definition, including philosophy, specifications, safety drawings, and system architecture.Prepare, review, and (as Lead Engineer) approve ESD logic (as applicable)/cause & effect diagrams and F&G logic (as applicable) / cause & effect diagrams.Review and (as Lead Engineer) approve specifications and data sheets for Instrumentation & Controls equipment.Review and (as Lead Engineer) approve I&C equipment spare parts lists.Review and (as Lead Engineer) approve inputs to P&ID development and markups based on receipt of vendor information.Review and (as Lead Engineer) approve I&C equipment testing procedures.Attend I&C equipment FATs, as required.Participate in HAZOP, SIL, and Classification Studies, as required.Assist in closing out HAZOP action items.Provide construction, pre-commissioning, and commissioning support, as required.

Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Apply knowledge and skills to a wide range of standard and non-standard situations.Prepare clear and accurate detailed design calculations and analyses, including design reports and procedures.Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area.Communicate and explain complex issues and work to establish understanding.Be fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for Discipline designs and drawings..Maintain close coordination with other engineering disciplines, Planning, Fabrication, and Project Management Teams, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Assist in the preparation of estimates for bid proposals, including technical query reviews, execution statements and man-hour estimates.Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Attend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Instrumentation & Controls Engineering.Prepare and review design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures; procurement assistance includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer.Assist in updating weight report based on receipt of vendor information.Check engineering performed by others within the Discipline.Review vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Perform design verification through single-discipline check / inter-discipline check (IDC).Provide technical support to all fabrication queries, including identifying defect/rectification requirements.Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary, and workforce related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Check final subcontractor and vendor data manuals to ensure that all requested data has been received.and approved.Participate in internal, customer, and third-party technical audits on engineering deliverables and vendor documents.Assist Lead Engineer with responses to customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval.Capture lessons learned and enter into MDR's Lessons Learned system.Act as а resource for colleagues with less experience.Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Be aware of costs related to own work and of the discipline.Prepare/review automation system definition, including philosophy, specifications, safety drawings, and system architecture.Prepare/review ESD logic (as applicable)/cause & effect diagrams and F&G logic (as applicable)/cause & effect diagrams.Prepare/update/review specifications and data sheets for Instrumentation & Controls equipment.Prepare/review I&C equipment spare parts lists.Prepare/review inputs to P&ID development and markups based on receipt of vendor information, Review I&C equipment testing procedures.Attend A&I equipment FATs, as required.Assist in close out of HAZOP action items.

Prepare and develop arrangement and detail conceptual, FEED, studies, and detail design drawings of high technical quality and professional consistent presentation ensuring clarity and ease of construction.Develop 3D models and ensure clash-free with other disciplines.Ensure design deliverables are completed and issued per project specifications, MDR, and project Level 2 & 3 procedures, and within agreed schedules.Apply knowledge and / or skills to complete а variety of day-to-day activities within own area.Continue developing skills to complete repetitive tasks efficiently.Prioritize and organize own work to meet agreed-upon deadlines.Become familiar with the Contract Scope of Work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Identify changes to scope and promptly raise change notifications in the Change Management system, including providing supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other disciplines to obtain input for Discipline designs and drawings.Liaise with other discipline support groups to ensure clearly defined interfaces, deliverables, and schedules are met.Document substantive communications (communications that result in significant decisions or assignment of actions), and forward copies to Discipline Lead Designer and Discipline Supervisor.Assist Discipline Lead Designer in preparing estimates for proposals and job scope changes, including execution statements, work schedules, and manhour requirements.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Participate in finalizing deliverables lists, deliverables, and philosophies to ensure compliance with specifications and functional integrity.Attend project kickoff and review meetings, vendor/supplier meetings, engineering and design meetings, and offshore site surveys as required.Research Customer standards and procedures to prepare project-specific design procedures and standards for submission to the Customer for approval.Set up and maintain the Discipline Master design drawing and document files, including final archiving.Prepare Discipline deliverables such as:3D model.Detailed design drawings .As-built drawings.Review drawings issued by other disciplines and incorporate the required data into Discipline drawings.Review vendor drawings and documents and incorporate required vendor data into Discipline drawings and documents.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Identify all items for which insufficient data is available to allow the drawing or model to be completed (HOLDS), and list these on the drawing and the standard HOLDS list form.Notify the Discipline Lead Designer when there are updates to the Holds list.Generate IDC design documentation for the project.Perform design verification through single discipline checks (SDC) and / or inter-discipline checks (IDC), providing comments to the Lead Designer.Review all project IDC design documentation for detailed technical interfaces.Maintain single discipline and inter-discipline check drawings and filing.Prepare, issue, and update the material and weight data take-offs.Assist Fabrication as required in resolving construction difficulties relating to design problems, clashes, etc.Monitor progress and maintain the deliverables register on an ongoing basis.Ensure compliance with the Project Execution Plan and the timely completion and archiving of drawings and documents.Keep the Lead Designer apprised of all activities, progress, and concerns, including manpower and budgetary-related.Assist in providing inputs for actual, planning, and forecasting progress reports, including associated productivity.Report errors and suggest a resolution for the same.Participate in design reviews and audits.Capture lessons learned and entered them into MDR's Lessons Learned system.Guide less experienced Designers on MDR and Discipline procedures, standards, worksheets, design calculations, software, technical queries, etc.Guide trainee Designers.Assist in the maintenance of departmental technical guidelines and standards.Further develop an understanding of MDR's business, including processes and procedures.

Job Overview:The Principal Mechanical Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Mechanical Engineering-related problems and will work independently with minimal guidance. The Principal Mechanical Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in Mechanical Engineering. As such, they must have in-depth expertise as well as broad knowledge of the Mechanical discipline within the Engineering function.Perform conceptual, FEED, and detailed analyses and Design as per Design basis, project specifications, design codes, and standards.Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses, including design reports and procedures.Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements.Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Interpret contractual requirements as they relate to engineering execution.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, and Project Management Team, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scope.Attend project kickoff and review meetings, vendor meetings, engineering meetings, and site surveys, as required.Provide technical direction and review of Designers producing products related to Mechanical Engineering.Prepare, review, and (as Lead Engineer) approve design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.

Job Overview:The Senior Process Engineer uses best practices and knowledge of internal or external issues to improve the process engineering discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Process Engineering Discipline. The Senior Process Engineer solves complex problems and uses discipline-specific knowledge to improve their products or services. The Senior Process Engineer impacts a range of customer, operational, project, or service activities with the Process Engineering Team and other related teams and ensures that they work within the appropriate guidelines and policies.Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Direct Engineering team as a Lead Engineer on small projects.Apply knowledge and skills to a wide range of standard and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses, including design reports and procedures.Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area.Clearly communicate and explain complex issues and work to establish understanding.Be fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for discipline designs and drawings.Maintain close coordination with other Engineering Disciplines, Planning, and Project Management Teams, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Assist in the preparation of estimates for bid proposals, including technical query reviews, execution statements, and work-hour estimates.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Prepare discipline engineering design basis, philosophies, and technical specifications as required.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Attend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Process Engineering.Prepare and review design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Review vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Check engineering performed by others within the discipline.Be aware of costs related to own work and of the discipline.Act as a resource for colleagues with less experience.Responsible for preparing/checking the following key deliverables, applicable as per the Project scope:Process simulations / Heat and material balances.Process flow diagrams (PFD).Piping and instrument diagrams (P&ID).Process safeguarding diagrams.Equipment and instrument process datasheets.Process specifications.Operating philosophy and startup and operating manuals.Equipment list (process data).Line list (process data).Equipment and line sizing calculations.Flare radiation and dispersion calculations.Depressurization and flare network studies.Process studies.Provide process assistance to other disciplines by performing IDC / providing inputs as required for the following activities:Layout review.Area classification drawings.Safety studies.Electrical load list.Equipment datasheets.Instrument datasheets.ESD and F&G logic diagrams and control narratives.Assist in close out of HAZOP action items.Participate in internal, customer, and third-party technical audits on engineering deliverables and vendor documents.

Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work design basis, project documentation, design codes and standards, and McDermott procedures within the planned schedule and budget.Apply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations and report them to the Project Management Team and Department Manager at an early stage.Prepare detailed design calculations and analyses including design reports and procedures.Manage own time to meet objectives and forecast and plan resource requirements.Lead others to solve complex problems, use sophisticated analytical thought to exercise judgment, and identify innovative solutions.Interpret internal/external business challenges and recommend best practices to improve technology, processes, or services.Explain difficult concepts and negotiate with others to adopt a different point of view.Focused on health and safety policies and procedures.Interface with other departments to obtain input for engineering and design.Interface with High-Value Centers (HVECs) ensuring a clear understanding of their SoW.Prepare Iso Curve based on required input in line with Project Level 3 Schedule.When acting as Lead Engineer or Area Lead:Review the Piping budget, and provide Piping input for the Project Execution Plan.Plan, organize, and assign tasks, responsibilities, and man-hour budgets to piping sub-discipline and verify tasks are completed within budgets.Support 3D-Model review at 30%, 60% & 90% progress.Provide Piping Discipline input into Plan Level 2, 3, and 4 schedules and review the dependencies.Prepare discipline forecasts identifying changes to scope and promptly raising a notification.Alert the team of any deviation from the Scope of work or a need for a change order.Provide piping man-hours, schedule, and deliverables list including Piping Discipline Execution Plan.Check and approve design philosophies, specifications, pipe supports, standard detail drawings, MTO, and material requisitions in accordance with the project scope of work and contract.Monitor KPI measurement results and take corrective action.Lead Piping Discipline during project internal or External Audits.Assist the Department Manager in the Performance Evaluation of Piping Team members.Support proposals and studies.When acting as Lead Engineer, in addition:Direct medium or large Engineering and Design Team.Lead the discipline engineering design of the assigned work area and complete within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard.Plan, organize, and direct all aspects of discipline execution of the assigned project including scope, deliverables, schedule, and manpower resources.Ensure interfaces and deliverables are clearly identified.Maintain responsibility for progress and productivity, identifying any required corrective action.Act as project representative for the discipline during meetings with the Project Team, Client, and relevant agencies such as certifying authorities, auditors, third parties, etc.Become fully familiar with the project SoW, Specification, Schedule, and all inter-discipline requirements.

Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Apply knowledge and skills to a wide range of standard and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area.Focus on completing work within budget.Delegate lead over the discipline project team when necessary.Clearly communicate and explain complex issues and work to establish understanding.Be fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management Teams, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Assist in the preparation of estimates for bid proposals, including technical query reviews, execution statements, and workhour estimates.Raise technical queries to obtain missing information, clarify work scope, and maintain client-preferred procedures, specifications, standards, practices, and operational requirements.Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Attend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Mechanical Engineering.Prepare and review design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures.Procurement assistance includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by the Discipline Lead Engineer.Assist in updating weight reports based on receipt of vendor information.Check engineering performed by others within the Discipline.Review vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Perform design verification through single-discipline check/ inter-discipline check (IDC).Provide technical support to all fabrication queries, including identifying defect/ rectification requirements.Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary, and manpower related.

Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work design basis, project documentation, design codes and standards, and McDermott procedures within the planned schedule and budget.Apply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations and report them to the Project Management Team and Department Manager at an early stage.Prepare detailed design calculations and analyses including design reports and procedures.Manage own time to meet objectives and forecast and plan resource requirements.Lead others to solve complex problems, use sophisticated analytical thought to exercise judgment, and identify innovative solutions.Interpret internal/external business challenges and recommend best practices to improve technology, processes, or services.Explain difficult concepts and negotiate with others to adopt a different point of view.Focused on health and safety policies and procedures.Interface with other departments to obtain input for engineering and design.Interface with High-Value Centers (HVECs) ensuring a clear understanding of their SoW.Prepare Iso Curve based on required input in line with Project Level 3 Schedule.When acting as Lead Engineer or Area Lead:Review the Piping budget, and provide Piping input for the Project Execution Plan.Plan, organize, and assign tasks, responsibilities, and man-hour budgets to piping sub-discipline and verify tasks are completed within budgets.Support 3D-Model review at 30%, 60% & 90% progress.Provide Piping Discipline input into Plan Level 2, 3, and 4 schedules and review the dependencies.Prepare discipline forecasts identifying changes to scope and promptly raising a notification.Alert the team of any deviation from the Scope of work or a need for a change order.Provide piping man-hours, schedule, and deliverables list including Piping Discipline Execution Plan.Check and approve design philosophies, specifications, pipe supports, standard detail drawings, MTO, and material requisitions in accordance with the project scope of work and contract.Monitor KPI measurement results and take corrective action.Lead Piping Discipline during project internal or External Audits.Assist the Department Manager in the Performance Evaluation of Piping Team members.Support proposals and studies.When acting as Lead Engineer, in addition:Direct medium or large Engineering and Design Team.Lead the discipline engineering design of the assigned work area and complete within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard.Plan, organize, and direct all aspects of discipline execution of the assigned project including scope, deliverables, schedule, and manpower resources.Ensure interfaces and deliverables are clearly identified.Maintain responsibility for progress and productivity, identifying any required corrective action.Act as project representative for the discipline during meetings with the Project Team, Client, and relevant agencies such as certifying authorities, auditors, third parties, etc.Become fully familiar with the project SoW, Specification, Schedule, and all inter-discipline requirements.

Job Overview:The Principal HSE Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex HSE Engineering-related problems and will work independently with minimal guidance. The Principal HSE Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of HSE Engineering. As such, they must have in-depth expertise in HSE Engineering as well as broad knowledge of the HSE Engineering discipline within the Engineering function.Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and - procedures.Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements.Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Interpret contractual requirements as they relate to engineering execution.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with other departments to obtain input for Discipline designs and drawings, and to develop clash-free designs.Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements.Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Provide technical direction and review of Designers producing products related to Fire Protection & Safety Engineering.Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope.Attend project kickoff and review meetings, vendor meetings, and engineering meetings as required.Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures.Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations, preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer.Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Review and (as Lead Engineer) approve design verification through single-discipline check/interdisciplinary check (IDC).Provide technical support to fabrication queries, including identifying defect/rectification requirements.Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and manpower related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Present issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirements.Perform (as required) Technical Quality Audit reviews by MDR Global Procedures.Capture lessons learned and entered them into MDR's Lessons Learned system.Guide less experienced engineers on Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Monitor costs of own work processes.Assist in the maintenance of departmental technical guidelines and standard calculation notes.Participate in the development and maintenance of Global Procedures, Software, and Standards.Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions, and/or present topics at lunch and learns; etc.)Provide information on employee performance to the Discipline Manager.Assist the Discipline manager in interviewing job applicants..Prepare, review, and (as Lead Engineer) approve the following:Design HSE & fire protection philosophies.Safety study scope of work specifications, requisitions, TBE, and purchase requisitions.Safety equipment lists.Firefighting equipment specifications and data sheets.Lifesaving and personnel safety equipment specifications and data sheets.Safety sign specifications and data sheets.Firewater demand and hydraulic calculation reports using PIPENET or equivalent software.Inputs to P&ID markups for Firewater ring main system and Deluge system including providing details of interconnection with hose reels, monitors, hydrants, and deluge valves /nozzles.Escape route and safety equipment layouts.Review and (as Lead Engineer) approve third-party safety study reports that comply with project specifications.Participate and (as Lead Engineer) coordinate safety workshops (such as HAZID/HAZOP) and provide inputs to safety study consultants.Prepare, review, and (as Lead Engineer) approve safety study close-out reports.Participate in 3D model reviews, as necessary.

Perform FEED Studies and detailed design engineering, analysis, and calculations on more complex and demanding engineering tasks.Apply knowledge and skills to complete varied assignments.Prepare clear and accurate detailed design calculations and analyses, including design reports and procedures.Prioritize and organize own work to meet deadlines.Focus on completing work within budget.Clearly communicate and explain information in straightforward engineering activities.Gain familiarity with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable.Recognize changes to scope and notify the Discipline Lead Engineer.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for discipline designs and drawings.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Provide required bid inputs as directed.Review MTOs for requisitions.Review vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Check engineering performed by others within the discipline.Develop an awareness of costs related to own work and of the discipline.Responsible for preparing/checking the following key deliverables, applicable as per the Project scope:Process simulations/Heat and material balances.Process flow diagrams (PFD).Piping and instrument diagrams (P&ID).Equipment and instrument process datasheets.Process specifications.Operating philosophy and startup and operating manuals.Equipment list (process data).Line list (process data).Equipment and line sizing calculations.Flare radiation and dispersion calculations.Depressurization and flare network studies.Process studies.

Job Overview:The Senior Structural Engineer uses best practices and knowledge of internal or external issues to improve the Structural engineer discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Structural engineer discipline. The Senior Structural Engineer solves complex problems and uses their discipline-specific knowledge to improve their products or services. The Senior Structural Engineer impacts a range of customer, operational, project, or service activities with the Structural engineer team and other related teams and ensures that they are working within the appropriate guidelines and policies.Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Direct Engineering team as a Lead Engineer on small projects.Apply knowledge and skills to a wide range of standard and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area.Clearly communicate and explain complex issues and work to establish understanding.Train/mentor Engineers.Assist MOPEX offices on projects.Have a good understanding of the other engineering departments.Initiate interface with other disciplines to obtain input for discipline designs.Provide engineering support as required.Perform engineering checks of drafting.Perform engineering checks prepared by others within the discipline.Perform design verification through single discipline check and assist with inter-discipline checks (IDC).Prepare MTOs of structures.Prepare specifications.Prepare subcontract documents.Review of vendor data.Prepare technical bid evaluations.Check designs for operational requirements, constructability, and maintainability.When acting as a Lead Engineer, in addition:Work as Lead Engineer on small projects or act as area lead or deputy lead.Take responsibility for all engineering and design work on small-size projects.Control and manage work hours, materials, progress.Work in close liaison with the Design Coordinator, area leads, etc.Coordinate with project management.Assist Project Manager in:Preparing deliverable control.Preparing schedule.Preparing progress reports.Preparing man-hour and capital expenditure estimates.Fill engineering work.Give relevant feedback to the department.When acting as an Engineering Specialist, in addition:Perform independent computer analyses of structures.Prepare details and layouts of structures.Prepare structural analyses and reports on calculations or perform specialist tasks (i.e. architectural designs, underground piping designs, complex structures, topsides, jackets, weight control reports, center of gravity reports)Is specialized in several fields (geotechnical, steel, concrete, dynamic calculations, FEM, fatigue calculations, earthquake, jackets, FPSOs, blast, hydrodynamics, architectural, etc.)Is specialized in some design codes (EC, ACI/AISC/API, GOST, etc.)Prepare Project Engineering guides.Coordinate and check the work of engineers and designers.

Job Overview:The Senior HSE Engineer uses best practices and knowledge of internal or external issues to improve the HSE Engineering discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the HSE Engineering discipline. The Senior HSE Engineer solves complex problems and uses their discipline-specific knowledge to improve their products or services. The Senior HSE Engineer impacts a range of customer, operational, project, or service activities with the HSE Engineering Team and other related teams and ensures that they are working within the appropriate guidelines and policies.Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Direct Engineering team as a Lead Engineer on small projects.Apply knowledge and skills to a wide range of standard and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area.Clearly communicate and explain complex issues and work to establish understanding.Be fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management teams, as required.Assist in the preparation of estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates.Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Attend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Fire Protection & Safety Engineering.Prepare and review design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures.Procurement assistance includes preparing and reviewing requisitions, evaluating technical quotations, preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by the Discipline Lead Engineer.Assist in updating weight reports based on receipt of vendor information.Check engineering performed by others within the Discipline (inter-discipline checks).Review vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Perform design verification through single-discipline check/inter-discipline check (IDC).Keep the Lead Engineer/PEM apprised of all activities and concerns, technical, budgetary, and manpower related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved.Participate in internal, Customer, and third-party technical audits on engineering deliverables and vendor documents.Assist Lead Engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval.Capture lessons learned and entered them into MDR's Lessons Learned system.Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Prepare design HSE & fire protection philosophies.Prepare safety study scope of work specifications, requisitions, TBE, and purchase requisitions.Prepare/review safety equipment lists.Prepare/review firefighting equipment specifications and data sheets.Prepare/review lifesaving and personnel safety equipment specifications and data sheets.Prepare/review safety sign specifications and data sheets.Prepare/review firewater demand and hydraulic calculation reports using PIPENET or equivalent software.Prepare, review, and provide inputs to P&ID markups for the firewater ring main system and Deluge system including providing details of interconnection with hose reels, monitors, hydrants, and deluge valves/nozzles.Prepare/review escape route and safety equipment layouts.Prepare/review safety sign layouts.Review third-party safety study reports that comply with project specifications.Participate, assist the Lead Engineer in coordinating safety workshops (such as HAZID/HAZOP), and provide inputs to safety study consultants.Assist the Lead Engineer in coordinating safety study closeouts and preparing safety study close-out reports.Review FP&S and relevant other disciplines' vendor data.Prepare/review technical notes on PFP rating requirements for the project based on Safety Study recommendations.Provide inputs for FP&S layouts, fire and gas detector layouts, and fire and gas cause and effects matrices.Prepare/review safety study safety action monitoring system (SEAMS) and SEAMS registers.Provide and review safety inputs to operations manuals.

Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Develop creative and innovative solutions that are reliable and cost-effective for problems and challenges when they arise.Apply expertise to the most complex problems.Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements.Develop and manage plans to achieve business objectives.Communicate and explain highly complex ideas and anticipate potential objections, influencing outcomes.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Interpret contractual requirements as they relate to engineering execution.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, and Project Management Teams, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Prepare estimates for bid proposals, including technical query reviews, execution statements, and work-hour estimates, identifying software requirements and any other project-specific requirements.Prepare bids and project's Discipline engineering budget and execution plans, updating as required.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Prepare, review and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope.Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Process Engineering.Prepare, review, and (as Lead Engineer) approve design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Present issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirements.Provide leadership, mentoring, and guidance to other Engineers.Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables.Monitor costs of own work processes.Evaluate costs associated with products and solutions.Assign personnel to analyze and design tasks based on knowledge of individual strengths and capabilities.Act as project-based Discipline point of contact in communications and meetings with Customer counterparts.Ensure substantive communications are documented.Identify project staff needs based on knowledge of individual engineers' skill sets and provide requests to the Discipline manager.Plan, organize, and assign tasks, responsibilities, and work-hours budgets to the discipline team and verify tasks are completed within budgets.Plan Discipline Level 4 detail deliverable schedule/register compliant with the overall execution plan.Prepare working forecasts identifying change management plans, corrective action, and real-time schedule.Provide Discipline inputs for actual, planning, and forecasting progress reports including associated productivity.Alert the project team of any deviation from the scope or a need for a change order.Monitor KPI measurement results and take corrective action as necessary to improve Discipline performance, including performance at interfaces with others.Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs.Review and approve requisitions, technical quotation evaluations, and queries, compiled bid tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required.Review comments from Customers & other agencies on documents and drawings produced by the team and resolve and give guidance on their update and incorporation.Assist the Discipline manager in the preparation of quarterly forecasts and workforce planning.Anticipate project engineering needs and plan accordingly.Coordinate with vendor for discipline-managed/procured items.Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of Project Team members.

Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements.Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management teams, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Prepare estimates for bid proposals, including technical query reviews, execution statements, and man-hour estimates, identifying software requirements and any other project-specific requirements. Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirementsPrepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scope.Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Electrical Engineering.Prepare, review, and (as Lead Engineer) approve design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures.Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by the Discipline Lead Engineer.Assist in updating weight reports based on receipt of vendor information.Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Review and (as Lead Engineer) approve design verification through single discipline check/interdisciplinary check (IDC).Provide technical support to fabrication queries, including identifying defect/rectification requirements.Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and manpower related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved.Present issues and problems to Customers in a timely manner and assist the Lead Engineer in negotiating resolution in accordance with project and company requirements.Perform (as required) Technical Quality Audit reviews in accordance with MDR Global Procedures.Assist Lead Engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approvalCapture lessons learned and entered them into MDR's Lessons Learned system.Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverable.Responsible for the engineering integrity of the assigned work area.Monitor costs of own work processes.Assist in the maintenance of departmental technical guidelines and standard calculation notes.Participate in the development and maintenance of Global Procedures, Software, and Standards.May participate in standards development committees or task groups such as API.Identify and provide training to staff in specific techniques and proprietary software.Provide information on employee performance to the Discipline Manager.Assist the Discipline manager in interviewing job applicants.Review and (as Lead Engineer) approve material lists, P&ID, etc. for Electrical equipment/systems and services for detailing the scope.Update and (as Lead Engineer) approve specifications and data sheets for Electrical and bulk materials.Review and (as Lead Engineer) approve Electrical system studies/calculations.Prepare, review, and (as Lead Engineer) approve one-line diagrams and schematics diagrams.

Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work design basis, project documentation, design codes and standards, and McDermott procedures within the planned schedule and budgetApply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations and report them to the Project Management Team and Department Manager at an early stagePrepare detailed design calculations and analyses including design reports and proceduresManage own time to meet objectives and forecast and plan resource requirementsLead others to solve complex problems, use sophisticated analytical thought to exercise judgment, and identify innovative solutionsInterpret internal/external business challenges and recommend best practices to improve technology, processes, or servicesExplain difficult concepts and negotiate with others to adopt a different point of viewFocused on health and safety policies and proceduresWhen acting as Lead engineer:Direct medium or large Engineering and Design team as a Lead EngineerLead the Discipline engineering design of the assigned work area and complete within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standardPlan, organize, and direct all aspects of discipline execution of the assigned project including scope, deliverables, schedule, and manpower resourcesEnsure interfaces and deliverables are clearly identifiedMaintain responsibility for progress and productivity, identifying any required corrective actionAct as project representative for the discipline during meetings with the project team, Client, and relevant agencies such as certifying authorities, auditors, third parties, etc.Become fully familiar with the project SoW, Specification, Schedule, and all inter-discipline requirementsInterface with other departments to obtain input for engineering and designInterface with High-Value Centers (HVECs) ensuring a clear understanding of their SoWPrepare Iso Curve based on required input in line with Project Level 3 ScheduleWhen acting as Lead Engineer or area Lead:Review the Piping budget, and provide Piping input for the Project Execution PlanPlan, organize, and assign tasks, responsibilities, and man-hour budgets to piping sub-discipline and verify tasks are completed within budgetsSupport 3D-Model review at 30%, 60% & 90% progressProvide Piping Discipline input into Plan Level 2, 3, and 4 schedules and review the dependenciesPrepare discipline forecasts identifying changes to scope and promptly raising a notificationAlert the team of any deviation from the Scope of work or a need for a change orderProvide piping man-hours, schedule, and deliverables list including Piping Discipline Execution PlanCheck and approve design philosophies, specifications, pipe supports, standard detail drawings, MTO, and material requisitions in accordance with the project scope of work and contractMonitor KPI measurement results and take corrective actionLead Piping Discipline during project internal or External AuditsAssist the Department Manager in the Performance Evaluation of Piping team membersSupport proposals and studiesReports to:        Project: Lead Engineer, Project Engineer or Project Manager      Functional: Department Manager      Liaise With: Designers and Engineers, other Engineering disciplines Leads, Construction & Fabrication Group,      Project Management Team, Document Control, Project Cost Control and Planning Group, Procurement Group,      Subcontractors and Vendors, Client      Supervises:  Piping Engineering and Layout Team

Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work design basis, project documentation, design codes and standards, and McDermott procedures within the planned schedule and budgetApply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations and report them to the Project Management Team and Department Manager at an early stagePrepare detailed design calculations and analyses including design reports and proceduresManage own time to meet objectives and forecast and plan resource requirementsLead others to solve complex problems, use sophisticated analytical thought to exercise judgment, and identify innovative solutionsInterpret internal/external business challenges and recommend best practices to improve technology, processes, or servicesExplain difficult concepts and negotiate with others to adopt a different point of viewFocused on health and safety policies and proceduresWhen acting as Lead engineer:Direct medium or large Engineering and Design team as a Lead EngineerLead the Discipline engineering design of the assigned work area and complete within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standardPlan, organize, and direct all aspects of discipline execution of the assigned project including scope, deliverables, schedule, and manpower resourcesEnsure interfaces and deliverables are clearly identifiedMaintain responsibility for progress and productivity, identifying any required corrective actionAct as project representative for the discipline during meetings with the project team, Client, and relevant agencies such as certifying authorities, auditors, third parties, etc.Become fully familiar with the project SoW, Specification, Schedule, and all inter-discipline requirementsInterface with other departments to obtain input for engineering and designInterface with High-Value Centers (HVECs) ensuring a clear understanding of their SoWPrepare Iso Curve based on required input in line with Project Level 3 ScheduleWhen acting as Lead Engineer or area Lead:Review the Piping budget, and provide Piping input for the Project Execution PlanPlan, organize, and assign tasks, responsibilities, and man-hour budgets to piping sub-discipline and verify tasks are completed within budgetsSupport 3D-Model review at 30%, 60% & 90% progressProvide Piping Discipline input into Plan Level 2, 3, and 4 schedules and review the dependenciesPrepare discipline forecasts identifying changes to scope and promptly raising a notificationAlert the team of any deviation from the Scope of work or a need for a change orderProvide piping man-hours, schedule, and deliverables list including Piping Discipline Execution PlanCheck and approve design philosophies, specifications, pipe supports, standard detail drawings, MTO, and material requisitions in accordance with the project scope of work and contractMonitor KPI measurement results and take corrective actionLead Piping Discipline during project internal or External AuditsAssist the Department Manager in the Performance Evaluation of Piping team membersSupport proposals and studiesReports to:        Project: Lead Engineer, Project Engineer or Project Manager      Functional: Department Manager      Liaise With: Designers and Engineers, other Engineering disciplines Leads, Construction & Fabrication Group,      Project Management Team, Document Control, Project Cost Control and Planning Group, Procurement Group,      Subcontractors and Vendors, Client      Supervises:  Piping Engineering and Layout Team

Perform conceptual, FEED, Studies and detailed analyses and design as per design basis, project specifications, design codes, and standardsDirect Engineering team as a Lead Engineer on small projectsApply knowledge and skills to a wide range of standard and nonstandard situationsPrepare clear and accurate detailed design calculations and analyses, including design reports and proceduresManage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own areaClearly communicate and explain complex issues and work to establish understandingBe fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issuesIdentify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimatesProvide similar support for Variation OrdersInterface with all disciplines to develop clash-free designsInterface with other departments to obtain input for Discipline designs and drawingsMaintain close coordination with other engineering disciplines, Planning, and Project Management Teams, as requiredDocument substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline ManagerAssist in the preparation of estimates for bid proposals, including technical query reviews, execution statements, and work-hour estimatesRaise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirementsPrepare Discipline engineering design basis, philosophies, and technical specifications as requiredParticipate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrityAttend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as requiredProvide technical direction and review of Designers producing products related to Process EngineeringPrepare and review design reports and proceduresAssist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverablesReview vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessaryGuide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Check engineering performed by others within the disciplineBe aware of costs related to own work and of the disciplineAct as a resource for colleagues with less experienceResponsible for preparing/checking the following key deliverables, applicable as per the Project scope:Process simulations / Heat and material balancesProcess flow diagrams (PFD)Piping and instrument diagrams (P&ID)Process safeguarding diagramsEquipment and instrument process datasheetsProcess specificationsOperating philosophy and startup and operating manualsEquipment list (process data)Line list (process data)Equipment and line sizing calculationsFlare radiation and dispersion calculationsDepressurization and flare network studiesProcess studiesProvide process assistance to other disciplines by performing IDC / providing inputs as required for the following activities:Layout reviewArea classification drawingsSafety studiesElectrical load listEquipment datasheetsInstrument datasheetsESD and F&G logic diagrams and control narrativesAssist in close out of HAZOP action itemsParticipate in internal, customer, and third-party technical audits on engineering deliverables and vendor documentsReports to:        Project:  Lead Engineer/PEM      Functional:  Supervising Department Manager      Liaise With:  All Engineering disciplines, Fabrication Group, Safety Department, Document Control, Procurement Group,      Subcontractors, Vendors, and Customers      Supervises: Engineers

Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standardsApply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situationsPrepare clear and accurate detailed design calculations and analyses including design reports and - proceduresManage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirementsClearly communicate and explain difficult concepts and persuade others to adopt a point of viewWhen acting as Lead Engineer, in addition:Direct medium or large Engineering team as a Lead EngineerLead the Discipline engineering design of the assigned work area and completed within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standardPlan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all manpower resources - agree allocations with the Discipline ManagerEnsure interfaces and deliverables are clearly identifiedMaintain responsibility for progress and productivity, identifying any required corrective actionAct as project representative for Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issuesInterpret contractual requirements as they relate to engineering executionIdentify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimatesProvide similar support for Variation OrdersInterface with all disciplines to develop clash-free designsInterface with other departments to obtain input for Discipline designs and drawingsMaintain close coordination with other engineering disciplines, Planning, and Project Management Teams, as requiredDocument substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline ManagerPrepare estimates for bid proposals, including technical query reviews, execution statements, and work-hour estimates, identifying software requirements and any other project-specific requirementsPrepare bids and project's Discipline engineering budget and execution plans, updating as requiredRaise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirementsPrepare, review and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specificationsParticipate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrityReview project schedule and fabrication schedule about construction sequence, milestones, and engineering scopeAttend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as requiredProvide technical direction and review of Designers producing products related to Process EngineeringPrepare, review, and (as Lead Engineer) approve design reports and proceduresAssist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverablesReview and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessaryPresent issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirementsGuide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverablesMonitor costs of own work processesResponsible for the engineering integrity of the assigned work areaDevelop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions and/or present topics at lunch and learns; etc.)Responsible for checking the following key deliverables, applicable as per the Project scope:Process simulations / Heat and material balancesProcess flow diagrams (PFD)Piping and instrument diagrams (P&ID)Equipment and instrument process datasheetsProcess specificationsOperating philosophy and startup and operating manualsEquipment list (process data)Line list (process data)Equipment and line sizing calculationsFlare radiation and dispersion calculationsDepressurization and flare network studiesProcess studiesProvide process assistance to other disciplines by performing IDC / providing inputs as required for the following activities:Layout reviewArea classification drawingsSafety studiesElectrical load listEquipment datasheetsInstrument datasheetsESD and F&G logic diagrams and control narrativesParticipate in HAZAN, HAZID, HAZOP, and other safety/operability/reliability studies and workshopsAssist in closing out HAZOP action itemsLead the Discipline team during project audits (internal, Customer, and third-party technical audits) and Design ReviewsReports to:        Project: Lead Engineer, Project Engineering Manager or Project Manager      Functional: Supervising Department Manager        Liaise with: All Engineering disciplines, Fabrication Group, Safety Department, Project Management Team, Document Control,      Project Planner, Project Cost Controller, QC, Certification Group, Procurement Group, Subcontractors, Vendors, and      Customers      Supervises: Senior Engineers and Engineers

Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standardsDevelop creative and innovative solutions that are reliable and cost-effective for problems and challenges when they ariseApply expertise to the most complex problemsManage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirementsDevelop and manage plans to achieve business objectivesCommunicate and explain highly complex ideas and anticipate potential objections, influencing outcomesWhen acting as Lead Engineer, in addition:Direct large Engineering team as a Lead Engineer on most unique and complex projectsLead the Discipline engineering design of the assigned work area and completed it within the planned schedule and budget, by standards, MDR, and project-specific procedures and to a high professional standardPlan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all workforce resources - agree on allocations with the Discipline ManagerEnsure interfaces and deliverables are identifiedMaintain responsibility for progress and productivity, identifying any required corrective actionAct as project representative for Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issuesInterpret contractual requirements as they relate to engineering executionIdentify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimatesProvide similar support for Variation OrdersInterface with all disciplines to develop clash-free designsInterface with other departments to obtain input for Discipline designs and drawingsMaintain close coordination with other engineering disciplines, Planning, and Project Management Teams, as requiredDocument substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline ManagerPrepare estimates for bid proposals, including technical query reviews, execution statements, and work-hour estimates, identifying software requirements and any other project-specific requirementsPrepare bids and project's Discipline engineering budget and execution plans, updating as requiredRaise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirementsPrepare, review and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specificationsParticipate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrityReview project schedule and fabrication schedule about construction sequence, milestones, and engineering scopeAttend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as requiredProvide technical direction and review of Designers producing products related to Process EngineeringPrepare, review, and (as Lead Engineer) approve design reports and proceduresAssist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverablesReview and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessaryPresent issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirementsProvide leadership, mentoring, and guidance to other EngineersSupervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverablesMonitor costs of own work processesEvaluate costs associated with products and solutionsAssign personnel to analyze and design tasks based on knowledge of individual strengths and capabilitiesResponsible for checking the following key deliverables, applicable as per the Project scope:Process simulations / Heat and material balanceProcess flow diagrams (PFD)Piping and instrument diagrams (P&ID)Process safeguarding diagramEquipment and instrument process datasheetsProcess specificationsOperating philosophy and startup and operating manualsEquipment list (process data)Line list (process data)Equipment and line sizing calculationsFlare radiation and dispersion calculationsDepressurization and flare network studiesProcess studiesProvide process assistance to other disciplines by performing IDC / providing inputs as required for the following activities:Layout reviewArea classification drawingsSafety studiesElectrical load listEquipment datasheetsInstrument datasheetsESD and F&G logic diagrams and control narratives

Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standardsApply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situationsPrepare clear and accurate detailed design calculations and analyses including design reports and - proceduresManage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirementsCommunicate and explain difficult concepts and persuade others to adopt a point of viewWhen acting as Lead Engineer, in addition:Direct medium or large Engineering team as a Lead EngineerLead the Discipline engineering design of the assigned work area and completed it within planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standardPlan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all manpower resources - agree allocations with the Discipline ManagerEnsure interfaces and deliverables are clearly identifiedMaintain responsibility for progress and productivity, identifying any required corrective actionAct as project representative for the Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issuesInterpret contractual requirements as they relate to engineering executionIdentify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimatesProvide similar support for Variation OrdersInterface with other departments to obtain input for Discipline designs and drawings, and to develop clash-free designsPrepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirementsPrepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specificationsParticipate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrityProvide technical direction and review of Designers producing products related to Fire Protection & Safety EngineeringReview project schedule and fabrication schedule about construction sequence, milestones, and engineering scopeAttend project kickoff and review meetings, vendor meetings, and engineering meetings as requiredAssist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and proceduresProcurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations, preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead EngineerReview and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessaryReview and (as Lead Engineer) approve design verification through single-discipline check/ interdisciplinary check (IDC)Provide technical support to fabrication queries, including identifying defect/rectification requirementsKeep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and manpower relatedAssist in providing inputs for actual, planning, and forecasting progress reports including associated productivityPresent issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirementsPerform (as required) Technical Quality Audit reviews by MDR Global ProceduresCapture lessons learned and entered them into MDR's Lessons Learned systemGuide less experienced engineers on Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Monitor costs of own work processesAssist in the maintenance of departmental technical guidelines and standard calculation notesParticipate in the development and maintenance of Global Procedures, Software, and StandardsDevelop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions, and/or present topics at "lunch and learns"; etc.)Provide information on employee performance to the Discipline ManagerAssist the Discipline manager in interviewing job applicantsReports to:       Project: Lead Engineer, Project Engineering Manager or Project Manager,        Functional: Supervising Department Manager       Liaise with: All Engineering disciplines, Fabrication Group, Safety Dept, Project Management Team, Document Control, Project       Planner, Project Cost Controller, QC, and Certification Group, Procurement Group, Subcontractors and Vendors, and       Customers       Supervises: Senior Engineers, Engineers

Key Tasks and Responsibilities:Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standardsDirect Engineering team as a Lead Engineer on small projectsApply knowledge and skills to a wide range of standard and nonstandard situationsPrepare clear and accurate detailed design calculations and analyses including design reports and proceduresManage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own areaClearly communicate and explain complex issues and work to establish understandingBe fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issuesIdentify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimatesProvide similar support for Variation OrdersInterface with other departments to obtain input for Discipline designs and drawingsMaintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management teams, as requiredAssist in the preparation of estimates for bid proposals, including technical query reviews, execution statements, and manhour estimatesPrepare Discipline engineering design basis, philosophies, and technical specifications, as requiredParticipate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrityAttend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as requiredProvide technical direction and review of Designers producing products related to Fire Protection & Safety EngineeringPrepare and review design reports and proceduresAssist in providing necessary design inputs to other disciplines to enable them in proceeding with their deliverablesAssist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and proceduresProcurement assistance includes preparing and reviewing requisitions, evaluating technical quotations, preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by the Discipline Lead EngineerAssist in updating weight reports based on receipt of vendor informationCheck engineering performed by others within the Discipline (inter-discipline checks)Review vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessaryPerform design verification through single-discipline check/ inter-discipline check (IDC)Keep the Lead Engineer/ PEM apprised of all activities and concerns, technical, budgetary, and manpower relatedAssist in providing inputs for actual, planning, and forecasting progress reports including associated productivityCheck final subcontractor and vendor data manuals to ensure that all requested data has been received and approvedParticipate in internal, Customer, and third-party technical audits on engineering deliverables and vendor documentsAssist Lead Engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approvalCapture lessons learned and entered them into MDR's Lessons Learned systemGuide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Prepare design HSE & fire protection philosophiesPrepare safety study scope of work specifications, requisitions, TBE, and purchase requisitionsPrepare/review safety equipment listsPrepare/review firefighting equipment specifications and data sheetsPrepare/review lifesaving and personnel safety equipment specifications and data sheetsPrepare/review safety sign specifications and data sheetsPrepare/review firewater demand and hydraulic calculation reports using PIPENET or equivalent softwarePrepare, review, and provide inputs to P&ID markups for the firewater ring main system and Deluge system including providing details of interconnection with hose reels, monitors, hydrants, and deluge valves/nozzlesPrepare/review escape route and safety equipment layoutsPrepare/review safety sign layoutsReview third-party safety study reports that comply with project specificationsParticipate, assist the Lead Engineer in coordinating safety workshops (such as HAZID/HAZOP), and provide inputs to safety study consultantsAssist Lead Engineer in coordinating safety study closeouts and preparing safety study close-out reportsReview FP&S and relevant other disciplines' vendor dataPrepare/review technical notes on PFP rating requirements for the project based on Safety Study recommendationsProvide inputs for FP&S layouts, fire and gas detector layouts, and fire and gas cause and effects matricesPrepare/review safety study safety action monitoring system (SEAMS) and SEAMS registersProvide and review safety inputs to operations manualsReports to Project: Lead Engineer/PEM       Functional: Supervising Department Manager       Liaise with: All Engineering disciplines, Fabrication Group, Safety Dept, Document Control, Procurement Group,       Subcontractors and Vendors, and Customers        Supervises: Engineers

Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standardsDevelop creative and innovative solutions that are reliable and cost-effective for problems and challenges when they ariseApply expertise to the most complex problemsManage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirementsDevelop and manage plans to achieve business objectivesClearly communicate and explain highly complex ideas and anticipate potential objections, influencing outcomesWhen acting as Lead Engineer, in addition:Direct large Mechanical Engineering team as a Lead EngineerLead the Discipline engineering design of the assigned work area and complete it within the planned schedule and budget, in accordance with standards, MOR, and project-specific procedures and to a high professional standardPlan, organize, and direct all aspects of Discipline execution on the assigned project, including scope, deliverables, schedule, and all workforce resources - agree on allocations with the Discipline ManagerEnsure interfaces and deliverables are clearly identifiedMaintain responsibility for progress and productivity, identifying any required corrective actionAct as project representative for the discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etcBecome fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering executionIdentify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimatesProvide similar support for Variation OrdersInterface with all disciplines to develop clash-free designsInterface with other departments to obtain input for Discipline designs and drawingsMaintain close coordination with other engineering disciplines, Planning, and Project Management Team, as requiredDocument substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline ManagerPrepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirementsRaise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirementsPrepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specificationsParticipate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrityReview project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scopeAttend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as requiredProvide technical direction and review of Designers producing products related to Mechanical EngineeringPrepare, review, and (as Lead Engineer) approve design reports and proceduresAssist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverablesAssist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer