Associate Jobs in Qatar

1. Project Planning & SchedulingDevelop and maintain detailed project schedules (using Primavera P6 or MS Project) for all phases of high-rise and low-rise construction.Create and update baseline programs, ensuring alignment with contract requirements and milestones.Identify critical paths, project float, and risk areas.2. Coordination & Interface ManagementCoordinate with project managers, site engineers, subcontractors, and consultants to gather inputs for planning.Ensure smooth integration of civil, structural, architectural, MEP, and finishing works into the master schedule.Conduct interface meetings between disciplines and stakeholders.3. Progress Monitoring & ReportingTrack progress on-site and compare with the approved schedule.Prepare weekly and monthly progress reports, dashboards, and presentations for management and client.Analyze deviations and suggest corrective actions to meet targets.4. Resource & Cost PlanningPlan manpower, equipment, and materials based on work breakdown structure (WBS).Support the quantity surveyor/estimation team in cost-loaded schedules and budget tracking.Identify areas of resource overallocation or underutilization.5. Delay Analysis & Claims SupportPrepare delay analysis (concurrent, excusable, compensable delays) using tools like Time Impact Analysis (TIA).Support in extension of time (EOT) submissions and claim documentation.Maintain records of events impacting the schedule.6. Tender & Pre-Construction SupportProvide planning input for tender submissions, including preliminary schedules, resource histograms, and method statements.Participate in bid clarifications and interviews with clients and consultants.7. Risk ManagementIdentify and monitor schedule risks, delays, and bottlenecks.Assist in the development and implementation of mitigation plans.8. System Implementation & Process ImprovementImplement planning procedures and templates aligned with project control standards.Suggest process improvements based on site feedback and project learnings.9. Software & Tools UtilizationUse software tools like:Primavera P6MS ProjectExcel for data analysisPower BI or similar tools for dashboards10. Leadership & MentoringLead a small planning team (Junior Planners, Planning Assistants).Provide training and guidance to junior staff in planning techniques and tools.

We are hiring experienced TETRA Network Engineers for a project involving the modernization and optimization of a mission-critical TETRA network, including TBS, IBS-MU, RU Repeaters, and all associated passive elements such as antennas, couplers, duplexers, and filters.Key ResponsibilitiesSupervise vendors during site work and special projects.Monitor and troubleshoot TETRA network issues per O&M protocols.Conduct site readiness checks and acceptances for modified TETRA/IBS sites.Manage IBS system implementation, optimization, and coverage.Collect and analyze logs for root cause diagnostics.Coordinate with cross-functional teams (NOC, Transmission, Power, etc.).Maintain spare part inventory and lab testing equipment.Ensure change requests and issue logs are maintained via HPSM or similar tools.Support care meetings, technical committees, and innovation initiatives.Prepare for site visits with proper spares and documentation.Merge activities effectively to optimize field operations.Escalate emergencies promptly and follow up to closure.Share best practices and support peer learning.Required Experience & SkillsEngineer: 7+ years of telecom experience (TETRA or similar systems).Strong understanding of:TETRA systems and IBS solutions.RF tools and indoor signal testing.IP configurations, fault management, and remote support tools.Diagnostic and integration capabilities in telecom environments.Educational & Language RequirementsBachelor’s degree in Electronics & Telecommunications or a related field.Fluency in English (spoken and written) is a must.

Responsible to plan and conduct work requiring judgment in the evaluation, selection, application and adaptation of Electrical & Instrumentation engineering techniques, procedures, and criteria. Planning and defining the complete E&I scope in each Project / Pre-order. Typically reports to Team Lead and co-ordinate with other inter-department for engineering design team activities.• Specification - Review of Project Specifications • Drawings - Review of P&I Drawings • Datasheets - Preparation of various Field Instruments Data Sheets (PG, LG, FG, TG, PT, LT, FT, TT, CV, Analyzer & Etc.) • Hook-up & MTO - Preparation of Process & Pneumatic Hook–up drawings & MTO • Documents - Preparation of Cable Engineering documents & MTO • Documents & Drawings - Preparation Instruments List, Alarm & Trip Schedule, IO list, Control narrative and cause & Effect drawing. • Logic Drawings - Preparation Control logic and Block Interlocking Diagrams • Cable tray - Preparation of Instrument & Electrical Cable tray routing drawings • BOM - Preparation Control System Configuration (PLC / DCS / RTU) and Bill of materials. • Review of Control System vendor documents (Wiring drawing / Calculation / Logic) • Electrical - Preparation of Electrical Data Sheets (Motor, Electric Heater, LCP, LCS, Cables & Trays) • Drawings - Preparation JB interconnection drawing and Local control panel Logic & drawing Preparation • Preparation of Electrical Load List • Selection of LT Electrical Equipment’s like MCC Switch gears, Variable Speed drives and LT Cables. • Vendor drawing review for all Electrical equipment’s (Motor, Electric Heater, LCP and LCS) • Overall E&I Hardware Estimation for procurement (Cable, Cable Tray, Cable Glands, junction box, PDB & Etc.). • PR - Preparation of purchase requisitions for instrumentation and electrical equipment’s / components • Offer evaluation - Technical BID Evaluation and Vendor technical offer Comments for various Field Instruments (As stated above) • Offer evaluation - Technical BID Evaluation and Vendor technical offer Comments for various Electrical components (As stated above) • Technical BID Evaluation and Vendor technical offer Comments for DCS / PLC / RTU. • Inter-Team coordination with various discipline (Project/package/Procurement/Design / Production) • E&I Technical support to proposal Team for Pre-Order engineering. • Reports- Preparation of Weekly / Monthly reports of project status • As-built - Preparation of as-built drawings and documents HSE RESPONSIBILITIES: • Organize the department, section or workplace so that any operation or work carried out is to a satisfactory standard of safety, with minimum risk to persons, materials and equipment. • Implementation of Health and Safety management system. • Participates to HIARA and for new activities/task • Takes part in all accident / incident investigation. • Allocate enough time for Toolbox meetings and HSE trainings. • Co-operate in the investigation of accidents with the objective of introducing methods to prevent reoccurrence. • Report all the unsafe conditions, near misses, Incidents etc. immediately to HSE department and ensure adequate control measures are taken to rectify the issues.

Job Overview:The Principal Structural Engineer (Weight Control) is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex structural-related problems and will work independently with minimal guidance. The Principal Structural Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of structural engineering. As such, they must have in-depth expertise in structural engineering as well as broad knowledge of the structural discipline within the engineering function.Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements.Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.Train/mentor other employees in the department.Assist and monitor MOPEX offices on projects.Have a good understanding of the other engineering departments.Initiate interface with other disciplines to obtain input for discipline designs.Have a good understanding of construction/fabrication yard and client requirements.Have commercial insight.Help to maintain unifi.Prepare bid from sketching data, using experience.Supervise engineers and designers.Define scopes of work for engineering/construction fabrication yard.Provide engineering support as required.Perform engineering checks of drafting.Perform engineering checks prepared by others within the discipline.Perform design verification through single discipline check and assist with inter-discipline checks (IDC).Prepare MTOs of structures.Prepare specifications.Prepare subcontract.Review vendor data.Prepare technical bid evaluations.

Job Overview:The Senior Subsea Engineer uses best practices and knowledge of internal or external issues to improve the Subsea discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Subsea discipline. The Senior Subsea Engineer solves complex problems and uses discipline-specific knowledge to improve their products or services. The Senior Subsea Engineer impacts a range of customer, operational, project, or service activities with the Subsea team and other related teams and ensures they work within the appropriate guidelines and policies.Job Responsibility:Provide specialist skills and knowledge in the areas related to engineering and analysis including design codes related to Subsea Engineering including Installation Engineering.Coordinate and engage in daily activities and schedule priorities for Subsea Engineering under limited supervision.Tender engineering support with an emphasis on document review, preparation of subcontractor documents, CTR preparation, bid evaluation, and vendor selection.Support Subsea projects and address various requirements for procurement, design, and installation engineering / analysis in a lead role.Assume responsibility for technical reports, design calculations, engineering analysis, and interface with third parties including subcontractors and verification bodies.Required to attend and prepare for project progress meetings and departmental meetings.Perform Installation Analysis for SURF projects using industry-standard software.Provide specialist skills and knowledge in the areas related to engineering and analysis including design codes related to Subsea Engineering including Installation Engineering.Required to attend and prepare for project progress meetings and departmental meetings.Adhere to the safety and legal objectives of the Company.Training and mentoring of graduates and Junior Engineers.Support in the development of knowledge in the area of design and analysis related to Subsea.Understand client requirements and develop solutions to address them, satisfying necessary codes and specifications.Take personal responsibility for design, analysis, and technical documentation.Liaise with an Operational Engineer to support project engineering and be available for site visits and offshore trips when necessary.Develop basic knowledge of McDermott's business units and interactions including Engineering, Fabrication, and Marine functions.Develop advanced skills in the use of standard productivity tools such as Microsoft Word, Excel, and PowerPoint.Understand and apply standards and procedures.Capture project lessons learned into McDermott’s Lessons Learned system.Participate in internal, customer, or third-party technical audits on engineering deliverables and vendor documents.

Job Overview:The Principal Subsea Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Subsea-related problems and will work independently with minimal guidance. The Principal Subsea Engineer may lead functional teams or projects and is regarded as a specialist in Subsea. As such, they must have in-depth expertise in Subsea as well as broad knowledge of the Subsea discipline within the Engineering function.Job Responsibility:Support subsea and offshore projects in performing design and installation engineering/analysis in a lead role and address various requirements for procurement.Provide specialist skills and knowledge in the areas related to engineering and analysis including design codes related to subsea engineering and installation engineering.Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations.Coordinate and engage in daily activities and schedule priorities for subsea engineering under limited supervision.Tender engineering support with an emphasis on document review, preparation of subcontractor documents, CTR preparation, bid evaluation, and vendor selection.Assume responsibility for technical reports, design calculations, engineering analysis, and interface with third parties including subcontractors and verification bodies.Required to attend and prepare for project progress meetings and departmental meetings.Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements.Act as Project Representative for the Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc.Adhere to the safety and legal objectives of the company.Train and mentor graduates and junior engineers.Perform Installation Analysis for rigid pipelines and risers including CLAD and Lined pipelines from reel-lay and S-lay vessels.Perform Installation Analysis for flexible flowlines, flexible risers of various configurations, umbilicals (static and dynamic) and subsea structures.Prepare Installation Analysis models using industry-standard packages and post-process analysis results applying design criteria from industry codes and client specifications.Support in the development of knowledge in the area of design and installation analysis related to subsea and offshore engineering.Review and (as Lead Engineer) approve third-party reports related to Installation Engineering and Analysis.Understand client requirements and develop solutions to address them, satisfying necessary codes and specifications.Take personal responsibility for design, analyses, and technical documentation.Liaise with operational teams to support project engineering and be available for site visits and offshore trips when necessary.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Interpret contractual requirements as they relate to engineering execution.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management Teams, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager.Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scope.Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Subsea Engineering.Prepare, review, and (as Lead Engineer) approve design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures; procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations, and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer.Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Review and (as Lead Engineer) approve design verification through single-discipline check I interdisciplinary check (IDC).Provide technical support to fabrication queries, including identifying defect and rectification requirements.Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary and manpower related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.

Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work, design basis, project documentation, design codes and standards, and McDermott procedures within the planned schedule and budget.Direct Engineering Team as a Lead Engineer on small projects.Apply skills and knowledge of the business, take a new perspective on existing solutions to address problems and non-standard situations, and report them to the Lead Piping Engineer at an early stage.Prepare detailed design calculations and analyses including design reports and procedures.Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area.communicate and explain complex issues and work to establish understanding.Ensure interfaces and deliverables are identified.Use best practices and knowledge of internal or external issues to improve products or services.Focus on health and safety policies and procedures.Become fully familiar with the project Scope of Work, Specification, Schedule, and all inter-discipline requirements.Interface with other departments to obtain input for engineering and design.Interface with High-Value Centers (HVECs) ensuring a clear understanding of their Scope of Work.Support 3D-Model review at 30%, 60% & 90% progress.Identifying changes to scope and promptly raising a notification.Alert the team of any deviation from the Scope of work or a need for a change order.Prepare design philosophies, specifications, pipe supports, standard detail drawings, MTO, and material requisitions by the project scope of work and contract.Explain difficult or sensitive information; works to build understanding.Fully familiar with P&ID, Line List, Equipment List, Layout, Piping Specifications, and design basis.Work independently, with minimal guidance when required.Act as a resource for colleagues with less experience.

Develop 3D Models and ensure clash free model in coordination with all other disciplines' requirements.Perform Design and engineering process facilities within a specified time while adhering to maintenance, safety, and quality standards; consider constructability, economics, and operation into account during Pre-FEED, FEED, or Detailed Design phases.Work within defined processes and procedures or methodologies and may help determine the appropriate approach for new assignments.Complete a variety of typical assignments as needed efficiently and with a limited degree of supervision and facilitate the work activities of others.Set priorities, organize own work and time to meet objectives, and (as Lead Designer or Area Lead) forecast and plan resource requirements.Ensure effective communications among other disciplines and effective management of change.Coordinate 3D Model Reviews and ensure Review comments are closed.Become fully familiar with Project Scope of Work, specifications, schedule and inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address them.Develop Plant Design and 3D Modelling, Drawings and input into Plant Layout Narrative in accordance with the agreed Scope of Work, man-hours, and schedule.Assist Lead Piping Engineer/ Designer in raising technical queries, preparing the piping estimate and job scope changes.Attend (As lead Piping Designer) project Kickoff and Review meetings, Vendor meetings.Monitor and coordinate the design team remotely if required and Lead a project in a Multi Office Project Execution Environment (MOPEX).Identify changes to scope and promptly raise change notification in the Change Management SystemAble to identify issues as soon as they arise and follow up with any required corrective action.Provide solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures.Act as an informal resource for colleagues with less experience.Ensure that the work is carried out in accordance with McDermott requirements, Client and Statutory Design Codes, Standards or Procedures with particular focus on Health and Safety Policies.When acting as Lead Designer or Area Lead Designer, in addition:Lead the Design Team to complete the tasks within the planned schedule and budget, in accordance with standards, McDermott and project-specific procedures.Act as project-based discipline point of contact in communications and meetings with Project Team, Client, Vendor/Supplier and/or Subcontractor counterparts.Ensure that the inter-discipline aspects of the design and deliverables are addressed.Support Lead Piping Engineer in measuring the progress and productivity.Coordinate all activities within own discipline and discipline interfaces with other disciplines.

Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards related to Telecom systems.Apply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements communicate and explain difficult concepts and persuade others to adopt а point of view.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Interpret contractual requirements as they relate to engineering execution.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management Teams, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope.Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Telecom Engineering.Prepare, review, and (as Lead Engineer) approve design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures; procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations, preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by the Discipline Lead Engineer.Assist in updating weight reports based on receipt of vendor information.Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Review and (as Lead Engineer) approve design verification through single-discipline check/inter-discipline check (IDC).Provide technical support to fabrication queries, including identifying defect/rectification requirements.Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and manpower related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved.Present issues and problems to Customers in а timely manner and assist the Lead Engineer in negotiating resolution by project and company requirements.Perform (as required) Technical Quality Audit reviews by MDR Global Procedures.Assist Lead Engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval.Capture lessons learned and enter into MDR's Lessons Learned system.Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables.Responsible for the engineering integrity of the assigned work area.Monitor costs of own work processes.Assist in the maintenance of departmental technical guidelines and standard calculation notes.Participate in the development and maintenance of Global Procedures, Software, and Standards.May participate in standards development committees or task groups such as NFPA.Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions, and/or present topics at lunch and learns; etc.).Identify and provide training to staff in specific techniques and proprietary software.Provide information on employee performance to the Discipline Manager.Assist the Discipline manager in interviewing job applicants.Prepare, review, and (as Lead Engineer) approve Telecom systems definition, including philosophy, specifications, safety drawings, and system architecture.Prepare, review, and (as Lead Engineer) approve FDS&GDS logic (as applicable)/cause & effect diagrams, cooperation with Instrumentation Engineering.Review and (as Lead Engineer) approve specifications and data sheets for Telecom equipment.Review and (as Lead Engineer) approve Telecom equipment spare parts lists.Review and (as Lead Engineer) approve inputs to P&ID (HSE Process Part especially) development and markups based on receipt of vendor information.Review and (as Lead Engineer) approve Telecom equipment testing procedures.Attend Telecom equipment FATs, as required.Participate in HAZOP, SIL, and Classification Studies, as required.Assist in closing out HAZOP action items if needed.Provide construction, pre-commissioning, and commissioning support, as required.Participate in Telecom equipment testing, as requiredGain deep knowledge of Telecom related systems (FDS, GDS, CCTV, TEL/LAN, Radio Systems (RS), Intercom Systems (IS), Public Address General Alarm Systems (PA-GA), Intrusion Detection Systems (IDS) and/or Access Control Systems (ACS), etc.)

Oracle EBS Technical Consultant / Data Architect (SCM, Finance, HR Analytics) •  Minimum 10+ years of experience in data architecture, data engineering, or analytics in an Oracle EBS environment.•  Bachelor’s degree in Computer Science, Engineering, or a related field.Design implementation of an enterprise-grade data lake to integrate data from Oracle EBS modules: SCM, Finance, and HR.   Work closely with Oracle EBS functional teams, Data Warehouse design teams and Business teams to understand source systems, data relationships, and business KPIs.   Collaborate with the reporting team to design and model executive-level dashboards and performance reports.   Guide the date warehouse technical team on data modeling for reporting layers, including semantic models and metric definitions.   Define and implement ETL processes using industry-standard tools and practices.   Design robust data architecture that ensures scalability, data quality, and governance.   Evaluate and recommend tools/technologies to support data strategy (e.g., ETL, cloud platforms, reporting tools).   Guide and support development of BI reports using tools such as OBIEE, OAC, and Power BI.   Generate and maintain technical documentation and data models.   Translate business requirements into optimized technical data solutions for reporting and analytics.   Provide technical leadership and support for data-related projects and ensure alignment with strategic reporting goals.   Liaise with Oracle EBS functional consultants, technical teams, and Business teams when needed during the design, development, and testing processes.   Perform quality assurance for all deliverables.   Follow HMC Service Management guidelines, including Change and Release management processes.  

Job Overview:The Senior Structural Engineer (Weight Control) uses best practices and knowledge of internal or external issues to improve the Structural engineer discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Structural engineer discipline. The Senior Structural Engineer solves complex problems and uses their discipline-specific knowledge to improve their products or services. The Senior Structural Engineer impacts a range of customer, operational, project, or service activities with the Structural engineer team and other related teams and ensures that they are working within the appropriate guidelines and policies.Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Direct Engineering team as a Lead Engineer on small projects.Apply knowledge and skills to a wide range of standard and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area.Clearly communicate and explain complex issues and work to establish understanding.Train/mentor Engineers.Assist MOPEX offices on projects.Have a good understanding of the other engineering departments.Initiate interface with other disciplines to obtain input for discipline designs.Provide engineering support as required.Perform engineering checks of drafting.Perform engineering checks prepared by others within the discipline.Perform design verification through single discipline check and assist with inter-discipline checks (IDC).Prepare MTOs of structures.Prepare specifications.Prepare subcontract documents.Review of vendor data.Prepare technical bid evaluations.Check designs for operational requirements, constructability, and maintainability.When acting as a Lead Engineer, in addition:Work as Lead Engineer on small projects or act as area lead or deputy lead.Take responsibility for all engineering and design work on small-size projects.Control and manage work hours, materials, progress.Work in close liaison with the Design Coordinator, area leads, etc.Coordinate with project management.Assist Project Manager in:Preparing deliverable control.Preparing schedule.Preparing progress reports.Preparing man-hour and capital expenditure estimates.Fill engineering work.Give relevant feedback to the department.When acting as an Engineering Specialist, in addition:Perform independent computer analyses of structures.Prepare details and layouts of structures.Prepare structural analyses and reports on calculations or perform specialist tasks (i.e. architectural designs, underground piping designs, complex structures, topsides, jackets, weight control reports, center of gravity reports)Is specialized in several fields (geotechnical, steel, concrete, dynamic calculations, FEM, fatigue calculations, earthquake, jackets, FPSOs, blast, hydrodynamics, architectural, etc.)Is specialized in some design codes (EC, ACI/AISC/API, GOST, etc.)Prepare Project Engineering guides.Coordinate and check the work of engineers and designers.

Job Overview:The Principal Structural Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex structural-related problems and will work independently with minimal guidance. The Principal Structural Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of structural engineering. As such, they must have in-depth expertise in structural engineering as well as broad knowledge of the structural discipline within the engineering function.Job Responsibility:Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements.Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.Train/mentor other employees in the department.Assist and monitor MOPEX offices on projects.Have a good understanding of the other engineering departments.Initiate interface with other disciplines to obtain input for discipline designs.Have a good understanding of construction/fabrication yard and client requirements.Have commercial insight.Help to maintain unifi.Prepare bid from sketching data, using experience.Supervise engineers and designers.Define scopes of work for engineering/construction fabrication yard.Provide engineering support as required.Perform engineering checks of drafting.Perform engineering checks prepared by others within the discipline.Perform design verification through single discipline check and assist with inter-discipline checks (IDC).Prepare MTOs of structures.Prepare specifications.Prepare subcontract.Review vendor data.Prepare technical bid evaluations.Assist in furthering the department.

Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Develop creative and innovative solutions that are reliable and cost-effective for problems and challenges when they arise.Apply expertise to the most complex problems.Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements.Develop and manage plans to achieve business objectives.Communicate and explain highly complex ideas and anticipate potential objections, influencing outcomes.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Interpret contractual requirements as they relate to engineering execution.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, and Project Management Teams, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Prepare estimates for bid proposals, including technical query reviews, execution statements, and work-hour estimates, identifying software requirements and any other project-specific requirements.Prepare bids and project's Discipline engineering budget and execution plans, updating as required.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Prepare, review and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope.Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Process Engineering.Prepare, review, and (as Lead Engineer) approve design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Present issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirements.Provide leadership, mentoring, and guidance to other Engineers.Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables.Monitor costs of own work processes.Evaluate costs associated with products and solutions.Assign personnel to analyze and design tasks based on knowledge of individual strengths and capabilities.Act as project-based Discipline point of contact in communications and meetings with Customer counterparts.Ensure substantive communications are documented.Identify project staff needs based on knowledge of individual engineers' skill sets and provide requests to the Discipline manager.Plan, organize, and assign tasks, responsibilities, and work-hours budgets to the discipline team and verify tasks are completed within budgets.Plan Discipline Level 4 detail deliverable schedule/register compliant with the overall execution plan.Prepare working forecasts identifying change management plans, corrective action, and real-time schedule.Provide Discipline inputs for actual, planning, and forecasting progress reports including associated productivity.Alert the project team of any deviation from the scope or a need for a change order.Monitor KPI measurement results and take corrective action as necessary to improve Discipline performance, including performance at interfaces with others.Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs.Review and approve requisitions, technical quotation evaluations, and queries, compiled bid tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required.Review comments from Customers & other agencies on documents and drawings produced by the team and resolve and give guidance on their update and incorporation.Assist the Discipline manager in the preparation of quarterly forecasts and workforce planning.Anticipate project engineering needs and plan accordingly.Coordinate with vendor for discipline-managed/procured items.Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of Project Team members.

Job Overview:The Senior HSE Engineer uses best practices and knowledge of internal or external issues to improve the HSE Engineering discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the HSE Engineering discipline. The Senior HSE Engineer solves complex problems and uses their discipline-specific knowledge to improve their products or services. The Senior HSE Engineer impacts a range of customer, operational, project, or service activities with the HSE Engineering Team and other related teams and ensures that they are working within the appropriate guidelines and policies.Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Direct Engineering team as a Lead Engineer on small projects.Apply knowledge and skills to a wide range of standard and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area.Clearly communicate and explain complex issues and work to establish understanding.Be fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management teams, as required.Assist in the preparation of estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates.Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Attend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Fire Protection & Safety Engineering.Prepare and review design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures.Procurement assistance includes preparing and reviewing requisitions, evaluating technical quotations, preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by the Discipline Lead Engineer.Assist in updating weight reports based on receipt of vendor information.Check engineering performed by others within the Discipline (inter-discipline checks).Review vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Perform design verification through single-discipline check/inter-discipline check (IDC).Keep the Lead Engineer/PEM apprised of all activities and concerns, technical, budgetary, and manpower related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved.Participate in internal, Customer, and third-party technical audits on engineering deliverables and vendor documents.Assist Lead Engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval.Capture lessons learned and entered them into MDR's Lessons Learned system.Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Prepare design HSE & fire protection philosophies.Prepare safety study scope of work specifications, requisitions, TBE, and purchase requisitions.Prepare/review safety equipment lists.Prepare/review firefighting equipment specifications and data sheets.Prepare/review lifesaving and personnel safety equipment specifications and data sheets.Prepare/review safety sign specifications and data sheets.Prepare/review firewater demand and hydraulic calculation reports using PIPENET or equivalent software.Prepare, review, and provide inputs to P&ID markups for the firewater ring main system and Deluge system including providing details of interconnection with hose reels, monitors, hydrants, and deluge valves/nozzles.Prepare/review escape route and safety equipment layouts.Prepare/review safety sign layouts.Review third-party safety study reports that comply with project specifications.Participate, assist the Lead Engineer in coordinating safety workshops (such as HAZID/HAZOP), and provide inputs to safety study consultants.Assist the Lead Engineer in coordinating safety study closeouts and preparing safety study close-out reports.Review FP&S and relevant other disciplines' vendor data.Prepare/review technical notes on PFP rating requirements for the project based on Safety Study recommendations.Provide inputs for FP&S layouts, fire and gas detector layouts, and fire and gas cause and effects matrices.Prepare/review safety study safety action monitoring system (SEAMS) and SEAMS registers.Provide and review safety inputs to operations manuals.

Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements.Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management teams, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Prepare estimates for bid proposals, including technical query reviews, execution statements, and man-hour estimates, identifying software requirements and any other project-specific requirements. Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirementsPrepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scope.Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Electrical Engineering.Prepare, review, and (as Lead Engineer) approve design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures.Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by the Discipline Lead Engineer.Assist in updating weight reports based on receipt of vendor information.Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Review and (as Lead Engineer) approve design verification through single discipline check/interdisciplinary check (IDC).Provide technical support to fabrication queries, including identifying defect/rectification requirements.Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and manpower related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved.Present issues and problems to Customers in a timely manner and assist the Lead Engineer in negotiating resolution in accordance with project and company requirements.Perform (as required) Technical Quality Audit reviews in accordance with MDR Global Procedures.Assist Lead Engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approvalCapture lessons learned and entered them into MDR's Lessons Learned system.Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverable.Responsible for the engineering integrity of the assigned work area.Monitor costs of own work processes.Assist in the maintenance of departmental technical guidelines and standard calculation notes.Participate in the development and maintenance of Global Procedures, Software, and Standards.May participate in standards development committees or task groups such as API.Identify and provide training to staff in specific techniques and proprietary software.Provide information on employee performance to the Discipline Manager.Assist the Discipline manager in interviewing job applicants.Review and (as Lead Engineer) approve material lists, P&ID, etc. for Electrical equipment/systems and services for detailing the scope.Update and (as Lead Engineer) approve specifications and data sheets for Electrical and bulk materials.Review and (as Lead Engineer) approve Electrical system studies/calculations.Prepare, review, and (as Lead Engineer) approve one-line diagrams and schematics diagrams.

Prepare and develop arrangement and detail conceptual, FEED, studies, and detail design drawings of high technical quality and professional consistent presentation ensuring clarity and ease of construction.Develop 3D models and ensure clash-free with all other disciplines.Ensure design deliverables are completed and issued per project specifications, MDR, and project Level 2 & 3 procedures, and within agreed schedules and budgets.Apply knowledge and/or skills to perform complex work.Set priorities, organize own work and time to meet objectives, and (as Lead Designer) forecast and plan resource requirements.Become fully familiar with the Contract Scope of Work, specifications, schedule, and all interdisciplinary requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Identify changes to scope and promptly raise change notifications in the Change Management system, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other disciplines to obtain input for Discipline designs and drawings.Liaise with other discipline support groups to ensure clearly defined interfaces, deliverables, and schedules are met.Document substantive communications (communications that result in significant decisions or assignment of actions), and forward copies to the Discipline Lead Designer and Discipline Supervisor.Assist Discipline Lead Designer in preparing estimates for proposals and job scope changes, including execution statements, work schedules, and man-hour requirements, identifying software requirements and any other project-specific requirements.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Participate in finalizing deliverables lists, deliverables, and philosophies to ensure compliance with specifications and functional integrity.Review project schedule and fabrication schedule in relation to construction sequence, milestones, and design scope.Attend project kickoff and review meetings, vendor/supplier meetings, engineering and design meetings, and offshore site surveys as required.Research Customer standards and procedures to prepare project-specific design procedures and standards for submission to the Customer for approval.Set up and maintain the Discipline Master design drawing and document files.Develop and maintain project job books.Prepare and review Discipline deliverables such as:3D model.Detailed design drawings.Develop conceptual layouts based on experience and good offshore engineering practice & develop these through detailed design.Assist the Lead Designer in supervising the preparation of key Discipline drawings.Liaise with the responsible Engineers for the timely expediting of Vendor Data to efficiently progress the project according to schedule requirements.Review drawings issued by other disciplines and incorporate the required data into Discipline drawings.Review vendor drawings and documents and incorporate required vendor data into Discipline drawings and documents.Assist in providing necessary design inputs to other disciplines to enable them in proceeding with their deliverables.Generate IDC design documentation for the project.Perform design verification through single discipline checks (SDC) and/or inter-discipline checks (IDC), providing comments to the Lead Designer.Review all project IDC design documentation for detailed technical interfaces.Maintain single discipline and inter-discipline check drawings and filing, including final archiving.Assist Fabrication as required in the resolution of construction difficulties relating to design problems, clashes, etc.Monitor progress and maintain the deliverables register on an ongoing basis.Ensure compliance with the Project Execution Plan and the timely completion and archiving of drawings and documents.Keep the Discipline Supervisor/Engineering Manager apprised of all activities, progress, and concerns, including manpower and budgetary-related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Prepare forecasting schedules for delayed deliverables.Advise the Lead Designer and Design Supervisor/Engineering Manager of problem areas and/or manpower concerns.Report errors and suggest a resolution for the same.Participate in design reviews and audits.Capture lessons learned and entered them into MDR's Lessons Learned system.Act as a technical resource to others in their own Discipline.Provide leadership, mentoring, and guidance to others.Assist in the maintenance of departmental technical guidelines and standards.Participate in the development and maintenance of Global Procedures, Software, Guidelines, and Standards.Incorporate approved Lessons Learned into MOR Level 2 & 3 drafting procedures and standards, as applicable.Further develop an understanding of MDR's business and processes.Identify and provide training to staff in specific techniques and proprietary software.Assist Department Manager in identifying departmental needs including the development of personnel and technical capabilities.Participate in McDermott forums and represent McDermott as a subject matter expert (SME).Provide information on employee performance to the Discipline Supervisor/ Engineering Manager.

Prepare and develop arrangement and detail conceptual, FEED, studies, and detail design drawings of high technical quality and professional consistent presentation ensuring clarity and ease of construction.Develop 3D models and ensure clash-free with other disciplines.Ensure design deliverables are completed and issued per project specifications, MDR, and project Level 2 & 3 procedures, and within agreed schedules and budgets.Apply knowledge and/or skills to a range of activities.Set priorities, organize own work and time to meet objectives, and (as a Lead Designer) forecast and plan resource requirements.Become fully familiar with the project scope of work, specification, schedule, and all inter-discipline requirements; identify concerns as early as practicable and take the appropriate initiative to address the issue.Identify changes to the scope and promptly raise change notifications and provide any necessary supporting documentation and estimates.Provide similar support for Variation Order.Interface with all disciplines to develop a clash-free design.Interface with other department to obtain input for Discipline design and drawing.Liaise with other discipline support groups to ensure clearly defined interface, deliverables, and schedule are met.Document substantive communication (communication that results in a significant decision or assignment of action) and forward copies to Discipline Lead Engineer and Discipline Manager.Assist Discipline Lead Designer in preparing estimates for proposal and job scope change, which include execution statement, work schedule, and manhour requirements, identify software requirements and any other project-specific requirement.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred Company procedure, specification, standard, practice, and operational requirement.Participate in finalizing deliverable list and deliverable, ensure compliance with specification and functional integrity.Review project schedule and fabrication schedule in relation to construction sequence, milestone, and design scope.Attend project kickoff and review meeting, vendor/supplier meeting, engineering and design meeting, and offshore site survey, as required.Research customer standards and procedures to prepare project-specific design procedures and standards for submission to the Customer for approval.Set up and maintain the Discipline Master design drawing and document files.Develop and maintain the project job book.Prepare and review discipline deliverables such as:3D model.Detailed design drawing.Develop conceptual layouts based on experience and good offshore engineering practice & develop these through detailed design.Assist the lead designer to supervise in the preparation of key discipline drawing.Liaise with the Engineer responsible for the timely expediting of Vendor Data to efficiently progress the project according to schedule requirement.Review drawings issued by other disciplines and incorporate the required data into Discipline drawing.Review vendor drawings and documents and incorporate required vendor data into discipline drawings and document.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverable.Generate IDC design documentation for the project.Perform design verification through single discipline checks (SDC)and/or inter-discipline checks (ID), provide comments to Lead Designer.Review all project IDC design documentation for detailed technical interface.Maintain single discipline and inter-discipline check drawings and filing, that include final archiving.Assist fabrication as required in the resolution of construction difficulties relating to design, problems, clash, etc.Monitor progress and maintain the deliverables register on an ongoing basis.Ensure compliance with the project execution plan and the timely completion and archive of drawings and document.Keep the Discipline Supervisor/Engineering Manager apprised of all activity and concerns, technical, budgetary, and manpower related.Assist in providing inputs for actual, plan, and forecast progress report that include associated productivity.Prepare forecast schedule of delayed deliverables.Advise the Lead Designer and Design Supervisor/Engineering Manager of problem areas and/or manpower concern.Report any error and suggest a resolution for the same.Participate in design review and audit.Highlight knowledge concepts and ensure learning is entered into the system.Act as a technical resource to others in their own discipline.Provide leadership, mentorship, and guidance to others.Assist in the maintenance of departmental technical guidelines and standards.Participate in the development and maintenance of Global Procedures, Software, Guidelines, and Standards.Incorporate approved lessons learned into level 2&3 drafting procedures and standards, as applicable.Develop an understanding of the business and process.Identify and provide training to staff in specific techniques and proprietary software.Assist the Department Manager in identifying departmental needs including the development of personnel and technical capability.Participate in forums and represent the company as subject matter expert (SME).Provide information on employee performance to the Discipline Supervisor/Engineering Manager.Assist discipline supervisor/engineering manager in interviewing a job applicant.Participate in the clash resolution meeting, as required.Travel to the fabrication yard or offshore to assist in mechanical completion, hookup, and/or commissioning, as required.

Prepare and develop arrangement and detail conceptual, FEED, studies, and detail design drawings of high technical quality and professional consistent presentation ensuring clarity and ease of construction.Develop 3D models and ensure clash-free with all other disciplines.Ensure design deliverables are completed and issued per project specifications, MDR, and project Level 2 & 3 procedures, and within agreed schedules.Apply knowledge and / or skills to complete a variety of day-to-day activities within own area.Continue developing skills to complete repetitive tasks efficiently.Prioritize and organize own work to meet agreed-upon deadlines.Become fully familiar with the Contract Scope of Work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Identify changes to scope and promptly raise change notification in the Change Management system, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other disciplines to obtain input for Discipline designs and drawings.Liaise with other discipline support groups to ensure clearly defined interfaces, deliverables, and schedules are met.Document substantive communications (communications that result in significant decisions or assignment of actions), and forward copies to Discipline Lead Designer and Discipline Supervisor.Assist Discipline Lead Designer in preparing estimates for proposals and job scope changes, including execution statements, work schedules, and man-hour requirements.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Participate in finalizing deliverables lists, deliverables, and philosophies to ensure compliance with specifications and functional integrity.Attend project kickoff and review meetings, vendor / supplier meetings, engineering and design meetings, and offshore site surveys as required.Research Customer standards and procedures in order to prepare project-specific design procedures and standards for submission to the Customer for approval.Set up and maintain the Discipline Master design drawing and document files, including final archivingPrepare and review Discipline deliverables such as:3D model.Detailed design drawings.As-built drawings.Review drawings issued by other disciplines and incorporate the required data into Discipline drawings.Review vendor drawings and documents and incorporate required vendor data into Discipline drawings and documents.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Identify all items for which insufficient data is available to allow the drawing or model to be completed (HOLDS), and list these on the drawing and on the standard 'HOLDS' list form Notify the Discipline Lead Designer when there are updates to the Holds list.Generate IDC design documentation for the project.Perform design verification through single discipline checks (SDC) and / or inter-discipline checks (IDC), providing comments to the Lead Designer.Review all project IDC design documentation for detailed technical interfaces.Maintain single discipline and inter-discipline check drawings and filing.Prepare, issue, and update material and weight data take-offs.Assist Fabrication as required in the resolution of construction difficulties relating to design problems, clashes, etc.Monitor progress and maintain the Discipline deliverables register on an ongoing basis.Ensure compliance with the Project Execution Plan and the timely completion and archiving of drawings and documents.Keep the Lead Designer apprised of all activities, progress, and concerns, including manpower and budgetary-related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Report errors and suggest resolution for the same.Participate in design reviews and audits.Capture lessons learned and enter into MDR's Lessons Learned system.Guide less experienced Designers on MDR and Discipline procedures, standards, worksheets, design calculations, software, technical queries, etc.Provide guidance to trainee Designers.Assist in the maintenance of departmental technical guidelines and standards.Further develop an understanding of MDR's business including processes and procedures.Prepare / review Electrical Design deliverables such as:3D model Electrical scopes.One-line diagrams.Schematics.Interconnection and wiring diagrams.Block diagrams.Area classification drawings.Conduit and cable schedules Power layout drawings.Earthing/grounding layout drawings Lighting layout drawings.Electrical cable tray drawings Electrical building drawings Electrical support drawings Electrical drawing indexes Lighting design calculations.Cable sizing.Prepare / review bills of material and perform material take-offs for electrical items including cables, lighting fixtures, cable trays, cable glands, termination kits, and MCTs.Participate in clash resolution meetings, as required.Travel to the fabrication yard to assist in mechanical completion, hookup, and / or commissioning, as required.

Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and - procedures.Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements.Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Interpret contractual requirements as they relate to engineering execution.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management teams, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope.Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Instrumentation and Controls Engineering.Prepare, review, and (as Lead Engineer) approve design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures; procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations, preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by the Discipline Lead Engineer.Assist in updating weight reports based on receipt of vendor information.Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Review and (as Lead Engineer) approve design verification through single-discipline check / inter-discipline check (IDC).Provide technical support to fabrication queries, including identifying defect/rectification requirements.Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and manpower related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved.Present issues and problems to Customers in а timely manner and assist the Lead Engineer in negotiating resolution by project and company requirement.Perform (as required) Technical Quality Audit reviews by MDR Global Procedures.Assist Lead Engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approvalCapture lessons learned and entered them into MDR's Lessons Learned system.Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables.Responsible for the engineering integrity of the assigned work area.Monitor costs of own work processes.Assist in the maintenance of departmental technical guidelines and standard calculation notes.Participate in the development and maintenance of Global Procedures, Software, and Standards.May participate in standards development committees or task groups such as API.Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions, and/or present topics at lunch and learns; etc.).Identify and provide training to staff in specific techniques and proprietary software.Provide information on employee performance to the Discipline Manager.Assist the Discipline manager in interviewing job applicants.Prepare, review, and (as Lead Engineer) approve automation system definition, including philosophy, specifications, safety drawings, and system architecture.Prepare, review, and (as Lead Engineer) approve ESD logic (as applicable)/cause & effect diagrams and F&G logic (as applicable) / cause & effect diagrams.Review and (as Lead Engineer) approve specifications and data sheets for Instrumentation & Controls equipment.Review and (as Lead Engineer) approve I&C equipment spare parts lists.Review and (as Lead Engineer) approve inputs to P&ID development and markups based on receipt of vendor information.Review and (as Lead Engineer) approve I&C equipment testing procedures.Attend I&C equipment FATs, as required.Participate in HAZOP, SIL, and Classification Studies, as required.Assist in closing out HAZOP action items.Provide construction, pre-commissioning, and commissioning support, as required.

Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Apply knowledge and skills to a wide range of standard and non-standard situations.Prepare clear and accurate detailed design calculations and analyses, including design reports and procedures.Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area.Communicate and explain complex issues and work to establish understanding.Be fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for Discipline designs and drawings..Maintain close coordination with other engineering disciplines, Planning, Fabrication, and Project Management Teams, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Assist in the preparation of estimates for bid proposals, including technical query reviews, execution statements and man-hour estimates.Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Attend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Instrumentation & Controls Engineering.Prepare and review design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures; procurement assistance includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer.Assist in updating weight report based on receipt of vendor information.Check engineering performed by others within the Discipline.Review vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Perform design verification through single-discipline check / inter-discipline check (IDC).Provide technical support to all fabrication queries, including identifying defect/rectification requirements.Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary, and workforce related.Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.Check final subcontractor and vendor data manuals to ensure that all requested data has been received.and approved.Participate in internal, customer, and third-party technical audits on engineering deliverables and vendor documents.Assist Lead Engineer with responses to customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval.Capture lessons learned and enter into MDR's Lessons Learned system.Act as а resource for colleagues with less experience.Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.Be aware of costs related to own work and of the discipline.Prepare/review automation system definition, including philosophy, specifications, safety drawings, and system architecture.Prepare/review ESD logic (as applicable)/cause & effect diagrams and F&G logic (as applicable)/cause & effect diagrams.Prepare/update/review specifications and data sheets for Instrumentation & Controls equipment.Prepare/review I&C equipment spare parts lists.Prepare/review inputs to P&ID development and markups based on receipt of vendor information, Review I&C equipment testing procedures.Attend A&I equipment FATs, as required.Assist in close out of HAZOP action items.

Prepare and develop arrangement and detail conceptual, FEED, studies, and detail design drawings of high technical quality and professional consistent presentation ensuring clarity and ease of construction.Develop 3D models and ensure clash-free with other disciplines.Ensure design deliverables are completed and issued per project specifications, MDR, and project Level 2 & 3 procedures, and within agreed schedules.Apply knowledge and / or skills to complete а variety of day-to-day activities within own area.Continue developing skills to complete repetitive tasks efficiently.Prioritize and organize own work to meet agreed-upon deadlines.Become familiar with the Contract Scope of Work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Identify changes to scope and promptly raise change notifications in the Change Management system, including providing supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other disciplines to obtain input for Discipline designs and drawings.Liaise with other discipline support groups to ensure clearly defined interfaces, deliverables, and schedules are met.Document substantive communications (communications that result in significant decisions or assignment of actions), and forward copies to Discipline Lead Designer and Discipline Supervisor.Assist Discipline Lead Designer in preparing estimates for proposals and job scope changes, including execution statements, work schedules, and manhour requirements.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Participate in finalizing deliverables lists, deliverables, and philosophies to ensure compliance with specifications and functional integrity.Attend project kickoff and review meetings, vendor/supplier meetings, engineering and design meetings, and offshore site surveys as required.Research Customer standards and procedures to prepare project-specific design procedures and standards for submission to the Customer for approval.Set up and maintain the Discipline Master design drawing and document files, including final archiving.Prepare Discipline deliverables such as:3D model.Detailed design drawings .As-built drawings.Review drawings issued by other disciplines and incorporate the required data into Discipline drawings.Review vendor drawings and documents and incorporate required vendor data into Discipline drawings and documents.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Identify all items for which insufficient data is available to allow the drawing or model to be completed (HOLDS), and list these on the drawing and the standard HOLDS list form.Notify the Discipline Lead Designer when there are updates to the Holds list.Generate IDC design documentation for the project.Perform design verification through single discipline checks (SDC) and / or inter-discipline checks (IDC), providing comments to the Lead Designer.Review all project IDC design documentation for detailed technical interfaces.Maintain single discipline and inter-discipline check drawings and filing.Prepare, issue, and update the material and weight data take-offs.Assist Fabrication as required in resolving construction difficulties relating to design problems, clashes, etc.Monitor progress and maintain the deliverables register on an ongoing basis.Ensure compliance with the Project Execution Plan and the timely completion and archiving of drawings and documents.Keep the Lead Designer apprised of all activities, progress, and concerns, including manpower and budgetary-related.Assist in providing inputs for actual, planning, and forecasting progress reports, including associated productivity.Report errors and suggest a resolution for the same.Participate in design reviews and audits.Capture lessons learned and entered them into MDR's Lessons Learned system.Guide less experienced Designers on MDR and Discipline procedures, standards, worksheets, design calculations, software, technical queries, etc.Guide trainee Designers.Assist in the maintenance of departmental technical guidelines and standards.Further develop an understanding of MDR's business, including processes and procedures.

Job Overview:The Principal Mechanical Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Mechanical Engineering-related problems and will work independently with minimal guidance. The Principal Mechanical Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in Mechanical Engineering. As such, they must have in-depth expertise as well as broad knowledge of the Mechanical discipline within the Engineering function.Perform conceptual, FEED, and detailed analyses and Design as per Design basis, project specifications, design codes, and standards.Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses, including design reports and procedures.Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements.Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Interpret contractual requirements as they relate to engineering execution.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, and Project Management Team, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements.Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements.Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scope.Attend project kickoff and review meetings, vendor meetings, engineering meetings, and site surveys, as required.Provide technical direction and review of Designers producing products related to Mechanical Engineering.Prepare, review, and (as Lead Engineer) approve design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.

Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work design basis, project documentation, design codes and standards, and McDermott procedures within the planned schedule and budget.Apply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations and report them to the Project Management Team and Department Manager at an early stage.Prepare detailed design calculations and analyses including design reports and procedures.Manage own time to meet objectives and forecast and plan resource requirements.Lead others to solve complex problems, use sophisticated analytical thought to exercise judgment, and identify innovative solutions.Interpret internal/external business challenges and recommend best practices to improve technology, processes, or services.Explain difficult concepts and negotiate with others to adopt a different point of view.Focused on health and safety policies and procedures.Interface with other departments to obtain input for engineering and design.Interface with High-Value Centers (HVECs) ensuring a clear understanding of their SoW.Prepare Iso Curve based on required input in line with Project Level 3 Schedule.When acting as Lead Engineer or Area Lead:Review the Piping budget, and provide Piping input for the Project Execution Plan.Plan, organize, and assign tasks, responsibilities, and man-hour budgets to piping sub-discipline and verify tasks are completed within budgets.Support 3D-Model review at 30%, 60% & 90% progress.Provide Piping Discipline input into Plan Level 2, 3, and 4 schedules and review the dependencies.Prepare discipline forecasts identifying changes to scope and promptly raising a notification.Alert the team of any deviation from the Scope of work or a need for a change order.Provide piping man-hours, schedule, and deliverables list including Piping Discipline Execution Plan.Check and approve design philosophies, specifications, pipe supports, standard detail drawings, MTO, and material requisitions in accordance with the project scope of work and contract.Monitor KPI measurement results and take corrective action.Lead Piping Discipline during project internal or External Audits.Assist the Department Manager in the Performance Evaluation of Piping Team members.Support proposals and studies.When acting as Lead Engineer, in addition:Direct medium or large Engineering and Design Team.Lead the discipline engineering design of the assigned work area and complete within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard.Plan, organize, and direct all aspects of discipline execution of the assigned project including scope, deliverables, schedule, and manpower resources.Ensure interfaces and deliverables are clearly identified.Maintain responsibility for progress and productivity, identifying any required corrective action.Act as project representative for the discipline during meetings with the Project Team, Client, and relevant agencies such as certifying authorities, auditors, third parties, etc.Become fully familiar with the project SoW, Specification, Schedule, and all inter-discipline requirements.

Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards.Apply knowledge and skills to a wide range of standard and nonstandard situations.Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area.Focus on completing work within budget.Delegate lead over the discipline project team when necessary.Clearly communicate and explain complex issues and work to establish understanding.Be fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues.Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates.Provide similar support for Variation Orders.Interface with all disciplines to develop clash-free designs.Interface with other departments to obtain input for Discipline designs and drawings.Maintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management Teams, as required.Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager.Assist in the preparation of estimates for bid proposals, including technical query reviews, execution statements, and workhour estimates.Raise technical queries to obtain missing information, clarify work scope, and maintain client-preferred procedures, specifications, standards, practices, and operational requirements.Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.Attend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.Provide technical direction and review of Designers producing products related to Mechanical Engineering.Prepare and review design reports and procedures.Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables.Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures.Procurement assistance includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by the Discipline Lead Engineer.Assist in updating weight reports based on receipt of vendor information.Check engineering performed by others within the Discipline.Review vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.Perform design verification through single-discipline check/ inter-discipline check (IDC).Provide technical support to all fabrication queries, including identifying defect/ rectification requirements.Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary, and manpower related.

Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work design basis, project documentation, design codes and standards, and McDermott procedures within the planned schedule and budget.Apply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations and report them to the Project Management Team and Department Manager at an early stage.Prepare detailed design calculations and analyses including design reports and procedures.Manage own time to meet objectives and forecast and plan resource requirements.Lead others to solve complex problems, use sophisticated analytical thought to exercise judgment, and identify innovative solutions.Interpret internal/external business challenges and recommend best practices to improve technology, processes, or services.Explain difficult concepts and negotiate with others to adopt a different point of view.Focused on health and safety policies and procedures.Interface with other departments to obtain input for engineering and design.Interface with High-Value Centers (HVECs) ensuring a clear understanding of their SoW.Prepare Iso Curve based on required input in line with Project Level 3 Schedule.When acting as Lead Engineer or Area Lead:Review the Piping budget, and provide Piping input for the Project Execution Plan.Plan, organize, and assign tasks, responsibilities, and man-hour budgets to piping sub-discipline and verify tasks are completed within budgets.Support 3D-Model review at 30%, 60% & 90% progress.Provide Piping Discipline input into Plan Level 2, 3, and 4 schedules and review the dependencies.Prepare discipline forecasts identifying changes to scope and promptly raising a notification.Alert the team of any deviation from the Scope of work or a need for a change order.Provide piping man-hours, schedule, and deliverables list including Piping Discipline Execution Plan.Check and approve design philosophies, specifications, pipe supports, standard detail drawings, MTO, and material requisitions in accordance with the project scope of work and contract.Monitor KPI measurement results and take corrective action.Lead Piping Discipline during project internal or External Audits.Assist the Department Manager in the Performance Evaluation of Piping Team members.Support proposals and studies.When acting as Lead Engineer, in addition:Direct medium or large Engineering and Design Team.Lead the discipline engineering design of the assigned work area and complete within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard.Plan, organize, and direct all aspects of discipline execution of the assigned project including scope, deliverables, schedule, and manpower resources.Ensure interfaces and deliverables are clearly identified.Maintain responsibility for progress and productivity, identifying any required corrective action.Act as project representative for the discipline during meetings with the Project Team, Client, and relevant agencies such as certifying authorities, auditors, third parties, etc.Become fully familiar with the project SoW, Specification, Schedule, and all inter-discipline requirements.