Jobs in Kuwait

Execute batch processes precisely, ensuring adherence to Standard Operating Procedures (SOPs) for optimal product quality.Monitor and control process parameters, proactively adjusting settings to maintain consistent product specifications and prevent deviations.Perform routine equipment maintenance and troubleshooting, identifying and resolving minor issues to minimize downtime and maximize efficiency.Accurately document all batch activities, including process parameters, material usage, and deviations, for comprehensive record-keeping.Safely handle and dispense raw materials, following established protocols to prevent contamination and ensure accurate measurements.Conduct quality checks throughout the batch process, collecting samples and performing tests to verify product compliance.Collaborate with other team members, sharing information and assisting in process improvements to streamline operations.

To assist Production Supervisors in all situations and taking full responsibility of finished product, labelling and re-work material on lineResponsibilities:To coordinate with shift supervisors and F.G.Controllers to have the right information in preparing labels for each item to be produced in production.Plan in advance the required job order to be run with instruction for the F.G.packers to avoid confusion in production.Take complete control over the F.G.packers and facing operator as not to have misunderstanding but to work as one team to have better end results.Maintain cleanliness in forming hood waste wool accumulation and to clean with high pressure pump the forming flights and curing oven flights blockages whenever possible, to reduce rejections percentageResponsible for line area cleanliness, packaging material arrangements, roll up machine operation and to be the support for facing operation process.Responsible for re-work task and all the instructions provided by the Supervisor to carry out.To make sure of the facing material on the shop floor and report to the foremen of unavailability.Report to maintenance and electrical the abnormalities of equipments if any during shift working hours to avoid any breakdowns specially during the absence of supervisors on line.Responsible in fixing PE for roll-up machine functions every one hours or less as per the speed and to monitor its feed abnormalities time to time basis.5S and EHS awareness to be passed on to all F.G.Packers on day to day basis and maintainResponsible in maintaining all the notice board documents.

Key Responsibilities:Create detailed manufacturing drawings and 3D models using AutoCAD, SolidWorks, or similar CAD software.Interpret design sketches, specifications, and engineering concepts into precise technical drawings.Modify and update existing drawings to reflect design changes or improvements.Collaborate with design, production, and quality teams to ensure manufacturability and accuracy.Maintain proper drawing documentation and ensure adherence to company and industry standards.

JOB DESCRIPTION – WINDOW FILM TECHNICIANPosition: Window Film Technician Experience: Minimum 3 years experience (Experience in GCC or India accepted) Salary Range: 140 KWD – 250 KWD (depending on experience and skill level)Responsibilities:Install high-quality automotive window film (tint) on various vehicle models.Measure, cut, and apply tint film accurately to ensure a clean, bubble-free finish.Prepare vehicle glass surfaces by cleaning and removing any contaminants before installation.Use proper tools, heat guns, and installation techniques to ensure smooth application.Remove old or damaged window film when required.Inspect completed work to ensure it meets company quality and customer satisfaction standards.Resolve installation issues such as creases, bubbles, or misalignment.Maintain tools, equipment, and a clean working environment.Work closely with supervisors and team members to complete jobs efficiently.Follow workshop safety procedures and guidelines at all times.Qualifications:Minimum 3 years experience as a Window Film Installer (GCC or India experience accepted).Strong knowledge of window film types, installation methods, and tools.Skilled in cutting, shrinking, and installing tint on windshields, side windows, and rear glass.Good attention to detail and precision in workmanship.Strong communication, teamwork, and time management skills.Ability to work under pressure while maintaining high-quality output.

Position: Carbon Fiber Technician Experience: Minimum 3 years GCC experience Salary Range: 300 KWD – 450 KWD (based on experience and skill level)Responsibilities:Fabricate, design, and install carbon fiber parts for various vehicle models.Perform carbon fiber lamination, molding, cutting, shaping, and finishing processes.Repair damaged carbon fiber components using professional techniques and materials.Ensure precise measurement, trimming, and fitment of carbon fiber parts.Use vacuum bagging, resin infusion, and other composite fabrication methods.Sand, polish, and finish carbon fiber surfaces to achieve premium quality results.Coordinate with body shop and modification teams for fitment and customization projects.Maintain tools, molds, and workspace in proper working condition.Follow workshop safety, environmental guidelines, and technical procedures.Inspect completed work to ensure accuracy, durability, and adherence to company quality standards.Qualifications:Minimum 3 years GCC experience in carbon fiber fabrication and installation.Strong knowledge of composite materials, tools, and advanced fabrication techniques.Skilled in mold making, vacuum forming, and carbon fiber lamination.Detail-oriented with excellent craftsmanship and finishing skills.Ability to read technical drawings and perform precise measurements.Strong teamwork, communication, and time management abilities.Ability to work efficiently under pressure while maintaining high-quality output

Position: Paint Mixer Experience: Minimum 5 years experience Salary Range: 300 KWD – 550 KWD (based on experience and skill level)Responsibilities:Mix automotive paint colors accurately according to vehicle manufacturer specifications.Prepare paint formulas, match colors, and adjust tones to achieve perfect color accuracy.Maintain paint mixing equipment, tools, and the paint room in proper working condition.Ensure all paint materials are stored safely and labeled correctly.Inspect paint quality, viscosity, and consistency before releasing to painters.Record and update paint formulas, inventory usage, and material stock levels.Support painters by providing correct paint mixtures and assisting with troubleshooting color issues.Follow safety standards regarding chemicals, hazardous materials, and workshop guidelines.Conduct regular quality checks to ensure paint matches meet company standards.Cooperate with the body shop team to meet project deadlines and customer requirements.Qualifications:Minimum 5 years experience as an automotive paint mixer.Strong knowledge of paint systems, color matching, tinting, and mixing procedures.Ability to use digital color-matching tools and manual techniques.Knowledge of paint viscosity control, drying times, and application compatibility.High attention to detail and accuracy in mixing formulas.Strong communication skills, teamwork, and time management.Ability to work in a fast-paced environment while maintaining quality output.

Position: Auto Technician Experience: Minimum 5 years GCC experience Salary Range: 300 KWD – 550 KWD (based on experience and skill level)Responsibilities:Diagnose and repair mechanical, electrical, and electronic issues in various vehicle models.Perform routine maintenance such as oil changes, brake servicing, suspension work, and engine tuning.Conduct comprehensive vehicle inspections to identify faults and recommend necessary repairs.Use diagnostic tools and software to troubleshoot engine, transmission, and electronic system issues.Repair or replace defective parts, ensuring proper functionality and safety.Perform test drives to confirm repair accuracy and vehicle performance.Ensure all repairs meet manufacturer standards and company quality guidelines.Maintain accurate service records, job cards, and reports.Keep tools and workspace clean, organized, and well-maintained.Follow workshop safety procedures and comply with all environmental and technical standards.Qualifications:Minimum 5 years GCC experience as an Auto Technician.Strong knowledge of automotive mechanical, electrical, and diagnostic systems.Skilled in operating diagnostic equipment and using repair manuals.Ability to work independently and as part of a team.Excellent problem-solving skills and strong attention to detail.Good communication and time-management abilities.Ability to work under pressure while maintaining high-quality workmanship.

Good driving skills and time management

Cultivate a vibrant and inclusive classroom environment where every child feels valued and encouraged to learn.Design and deliver engaging lesson plans that cater to diverse learning styles and promote critical thinking.Assess student progress regularly through various methods, providing constructive feedback to foster growth.Collaborate with parents/guardians to build a strong home-school partnership, supporting student success.Manage classroom behavior effectively, creating a safe and respectful space for all learners.Adapt teaching strategies to meet the needs of students with varying abilities and learning challenges.Participate actively in school-wide initiatives and professional development to continuously improve teaching practices.Foster a love of learning by creating exciting and memorable learning experiences.Prepare students for standardized tests while maintaining a focus on overall student development.

As a Specialist Data Governance, you will ensure that day-to-day tasks are completed on time, efficiently and contributing to overall objectives of data governance. Your focus will be on to develop and maintain data governance policies, frameworks, and procedures to ensure compliance with organizational objectives. The role also includes preparing presentations and dashboards for internal and external management meetings, assisting in the implementation of the governance roadmap, coordinating with work streams on deliverables.Key ActivitiesDevelop data governance policies, processes and standards in alignment of data governance strategy, roadmap, vision and provided guidance.Support in implementing data governance strategies, policies and implementation of roadmap.Collaborate and work closely with different data stakeholders, departments, and business units to achieve Data Governance requirements.Analyze and prepare presentations and gap analysis related to data governance.

PHYSICIAN'S QUALIFICATION:Specialist: Bachelor + Master +PhD 3 years of experience after PhD Registrar: Bachelor + Masters 1 year of experience after Master’sPosition Available:Internal Medicine (Specialist/ Registrar)ER/ Casualty (Specialist/ Registrar) *Must hold an MS in ERENT (Registrar)Dermatology ( Specialist/ Registrar)Cardiology ( Registrar)

Expertly install ceramic, porcelain, marble, and other tile types, ensuring precise cuts and layouts to meet project specifications and aesthetic goals.Prepare surfaces by leveling, applying mortar, and ensuring proper adhesion, utilizing techniques to address imperfections and guarantee long-lasting installations.Perform gypsum carpentry tasks, including framing, drywall installation, and finishing, integrating tile work seamlessly with other construction elements.Accurately measure, cut, and shape tiles and gypsum materials using hand and power tools, maintaining a high level of precision and minimizing waste.

Operate and maintain industrial washing machines, ensuring optimal cleaning performance and efficiency for various fabric types.Sort and categorize laundry items based on fabric type, color, and cleaning requirements to prevent damage and maintain quality.Load and unload washing machines, dryers, and other laundry equipment, adhering to load capacity guidelines to prevent equipment malfunction.Monitor wash cycles, adjusting settings as needed, to achieve the desired level of cleanliness and prevent damage to garments.

Develop and innovate dessert menus that reflect seasonal ingredients and current trends, ensuring a unique dining experience.Oversee the daily operations of the pastry kitchen, including inventory management and ordering of specialty ingredients.Train, mentor, and supervise junior pastry staff, fostering a collaborative and creative environment.Ensure all pastries and desserts are prepared with precision, adhering to recipes and presentation standards.

Customer focused sales in ladies' fashion boutiquePossess strong experience in retail fashion salesDeliver exceptional customer serviceCommunicate effectively with customersMaintain a professional and friendly attitudeManage sales transactions and ensure quality service

Position: PPF (Paint Protection Film) Technician Experience: Minimum 3 years experience (Experience in GCC or India accepted) Salary Range: 150 KWD – 250 KWD (depending on experience and skill level)Responsibilities:Perform high-quality installation of Paint Protection Film on various vehicle models.Measure, cut, and apply PPF accurately to protect vehicle surfaces from scratches and damage.Prepare vehicle surfaces prior to installation, ensuring cleanliness and smoothness.Use proper tools, heat application, and installation techniques to avoid bubbles and imperfections.Remove and re-install parts if required to ensure a clean and professional finish.Inspect completed work to ensure it meets company quality standards.Follow installation guidelines and maintain a high level of attention to detail.Maintain a clean, organized workspace and ensure proper care of tools and materials.Coordinate with supervisors and team members to meet deadlines and customer requirements.Adhere to safety and workshop regulations at all times.Qualifications:Minimum 3 years experience as a PPF Installer/Technician (GCC or India experience accepted).Strong knowledge of PPF materials, installation tools, and techniques.Ability to install full-body, partial, and custom-cut PPF patterns.Good hand-eye coordination, precision, and focus.Strong teamwork, communication skills, and time management.Ability to work in a fast-paced environment with high-quality output.

Position: Auto Denter Experience: Minimum 5 years GCC experience Salary Range: 250 KWD – 400 KWD (depending on experience and skill level)Responsibilities:Perform dent removal, body panel repairs, and straightening of damaged vehicle parts.Restore and reshape vehicle body structures using proper tools and repair techniques.Diagnose damaged areas and decide the most efficient repair process.Conduct welding, filling, grinding, sanding, and surface preparation for painting.Align metal panels to match factory specifications.Ensure all repaired areas meet company quality and safety standards.Coordinate with painters and the body shop supervisor to complete jobs efficiently.Maintain an organized, clean, and safe workspace.Follow all workshop health, safety, and environmental regulations.Qualifications:Minimum 5 years GCC experience as an Auto Denter.Strong knowledge of vehicle body repair tools, materials, and equipment.Skilled in dent pulling, metal straightening, welding, and body panel alignment.Good attention to detail, teamwork, and time management.Ability to work under pressure and meet deadlines.

Experience: Minimum 5 years GCC experience Salary Range: 200 KWD – 350 KWD (based on experience and skill level)Responsibilities:Perform full automotive painting, including preparation, priming, color matching, and finishing.Inspect vehicle surfaces to identify damages, rust, or imperfections before painting.Mix and match paint colors accurately according to manufacturer standards.Apply paint using spray guns and other professional painting tools.Conduct sanding, masking, and surface preparation to ensure high-quality results.Ensure all painted surfaces meet company quality standards and customer expectations.Work with the body shop team to coordinate repairs and painting schedules.Maintain cleanliness and safety standards in the painting area.Follow all health, safety, and environmental regulations in the workshop.Qualifications:Minimum 5 years proven experience in the GCC as an auto painter.Strong knowledge of automotive paint systems, materials, and equipment.Ability to perform both small touch-ups and full body repainting.Good teamwork, time management, and attention-to-detail skills.Ability to work under pressure and meet deadlines.

Safely operate various types of vehicles, ensuring timely and efficient transportation of passengers or goods.Conduct pre-trip and post-trip vehicle inspections to ensure safety and compliance with regulations.Maintain accurate logs of driving hours, mileage, and fuel consumption to ensure adherence to company policies.Plan and navigate routes using GPS and maps to optimize travel time and avoid delays.

Job title: API Inspector (510 & 653)Location: KuwaitJob type: Temporary - ShutdownBenefits: OT + (FAT, Flight tickets)

Customer focused sales in ladies' fashion boutiquePossess strong experience in retail fashion salesDeliver exceptional customer serviceCommunicate effectively with customersMaintain a professional and friendly attitudeManage sales transactions and ensure quality service

We are seeking a talented and creative Videographer & Video Editor to produce high-quality video content for our brand. The ideal candidate is skilled in shooting, lighting, and editing, with a strong understanding of storytelling and visual communication. This role involves working closely with the marketing and creative teams to deliver engaging videos for social media, advertising campaigns, events, and other promotional needs.VideographyPlan, shoot, and produce video content for various platforms (Instagram, TikTok, YouTube, website, ads).Operate cameras, lighting equipment, audio gear, and stabilization tools.Capture high-quality footage during events, interviews, and studio sessions.Scout locations and prepare production setups.Ensure proper lighting, framing, and composition.Video EditingEdit videos using Adobe Premiere Pro, Final Cut Pro, DaVinci Resolve, or similar tools.Add graphics, transitions, sound effects, subtitles, color correction, and color grading.Create short-form video content optimized for social media platforms.Maintain brand consistency across all visual outputs.Manage raw footage, organize files, and create final deliverables.Additional TasksCollaborate with the creative team on concepts, scripts, and storyboards.Produce reels, promotional videos, testimonials, product videos, and event highlights.Ensure all content is delivered on time and meets quality standards.Stay updated with video trends, editing styles, and platform requirements.Follow brand guidelines and creative direction.QualificationsProven experience as a videographer and video editor (portfolio required).Strong knowledge of cinematography fundamentals.Proficiency in editing software (Premiere, Final Cut, DaVinci Resolve).Experience in color grading and audio mixing.Familiar with social media content formats and optimization.Ability to work under pressure and meet deadlines.Creativity, attention to detail, and strong storytelling skills.Preferred SkillsMotion graphics knowledge (After Effects or similar).Photography skills.Experience with drone videography (if licensed).Ability to create content quickly and efficiently.

Conduct thorough surveillance of infections, analyze data, and identify trends to proactively address potential outbreaks and implement targeted interventions.Develop and deliver engaging training programs for healthcare staff on infection control practices, emphasizing proper hand hygiene, PPE use, and isolation protocols.Investigate and manage infection control breaches, including outbreaks, implementing corrective actions and reporting to relevant authorities.Collaborate with multidisciplinary teams, including physicians, nurses, and environmental services, to ensure a coordinated approach to infection prevention.Develop and update infection control policies and procedures, ensuring they are evidence-based, current, and accessible to all staff members.

I have a full website written in English and I’m ready to roll it out to new markets. I need an experienced translator who can take the existing pages, menus, and meta descriptions and render them naturally in one or more target languages of your expertise. Here’s what I’m looking for: • Accurate, idiomatic translation of all on-page copy, image captions, buttons, and CTAs. • Localization of tone and cultural references so the site feels native to each audience. • Preservation of SEO elements—page titles, keywords, and meta tags—while keeping them search-friendly in the new language(s). • Delivery of the translated text in an organized format (Markdown, Word, or tagged HTML) that mirrors the source structure, ready for my dev team to drop in. The source files are fewer than 8,000 words in total. You can propose any language you’re fluent in; just let me know your specialty and past web-translation experience when you bid. If you cover multiple languages, outline each one and its turnaround time. Quality, consistency, and clarity are key. I will review samples from previous website projects before awarding, and I may start with a short paid test page to ensure style alignment. Job details will be shared on telegram, if you're interested then contact us on telegram via the username (@Inetum_official)

Caliber Brands is headquartered in Dubai, dedicated to making people’s lives better through high-quality, stylish, and functional home & kitchen products. They represent and operate major consumer appliance brands, including Nutricook and Nutribullet, in the region. The company prides itself on combining elegant design with high-quality kitchen appliances priced to appeal to mid- to premium-segment customers.Caliber Brands emphasizes profitability, agility, and hands-on execution. The leadership team is accessible, with direct lines to decision-makers above the management level.Caliber is currently among the top three players in most GCC markets for its segment and is looking to strengthen its competitive edge by accelerating growth via aggressive market expansion and executionThis is a high-impact role central to the organization’s growth strategy. The Sales Manager / BD Manager will lead revenue generation and market expansion across the Kuwait markets, stepping into a mid-management role with growth opportunities. The hired candidate must hit the ground running, leveraging existing relationships and market knowledge to drive immediate results.This is a high-impact role central to the organization’s growth strategy. The Sales Manager/BD Manager will lead revenue generation and market expansion across the Kuwait markets, stepping into a mid-management role with growth opportunities. The hired candidate must hit the ground running, leveraging existing relationships and market knowledge to drive immediate results.Lead sales and business development efforts across Kuwait markets.Drive top-line revenue growth while safeguarding profitability and contribution to the bottom line.Develop and manage strategic relationships with distributors, national accounts, and key retail partners.Identify and capitalize on new growth opportunities (new products, channels, and cross-border expansion).Own and manage pipeline, sales forecasts, target setting, and performance tracking (monthly, quarterly, annually).Create market intelligence reports (competitive analysis, pricing trends, and consumer behavior) and advise senior management.Coordinate with marketing, operations, logistics, and supply chain to ensure smooth execution.Represent Caliber Brands at trade shows, exhibitions, conferences, and high-stakes customer meetings.Mentor, guide, and collaborate with internal teams (if any) or external partners to ensure alignment and execution excellence.